close
    Searching...
    Request a Quote

    NRP Jones ISO-9001:2015 Certified Quality System
    API 7K FSL 1 temp range 2 Certified

    Hydraulic Hose

    NRP Jones offers a full line of standard SAE and specialty hydraulic hoses with both braided and spiral construction including:

    2 wire braided

    2 wire braided

    1 wire braided

    1 wire braided

    4 wire spiral

    4 wire spiral

    6 wire spiral

    6 wire spiral

    Specialty Hydraulic Hose

    Specialty Hydraulic Hose Including:

    In addition to our standard SAE hoses, NRP Jones offers many specialty hydraulic hoses to meet specific applications.  Including:

    • HydraMax DIN 20022-2SN
    • MIL-H-13531 Type 1
    • Power Jack Hose
    • MIL-H-13531 Type 2
    • 3 Wire Braid
    • Non-Conductive Twin Line
    • 4SH High Pressure Hose
    • Aquablast Ultra and Aquablast Premier Waterblast Hoses
    • High Pressure Isobaric Spiral Hose

    Choose a category

    A360 Blu Finn Marine Fuel Hose

    A360 Blu Finn Marine Fuel Hose

    Approvals Part Number Hose I.D. Hose O.D. Working Pressure (psi) Test Pressure (psi) Min Burst Design (psi) Min Bend Radius Weight/FT. (lbs) Temp (°F)
    A360-05 1/4” .580 700 1,400 2,800 1 .2 212
    A360-06 5/16” .670 700 1,400 2,800 1-1/4 .25 212
    A360-08 13/32" .760 700 1,400 2,800 1-3/4 .29 212
    A360-10 1/2" .920 700 1,400 2,800 2-1/4 .41 212
    A360-12 5/8" 1.070 700 1,400 2,800 2-3/4 .49 212
      A360-16 7/8" 1.240 400 800 1,600 3-1/2 .54 212
    • Recommended for: Marine Fuel & Engine Hose
    • Application(s): Conveying Gas / Diesel Fuel aboard small watercraft (including pleasure-craft)
    • Core: Fuel / Oil Resistant Nitrile Tube
    • Reinforcement: One high tensile steel wire braid
    • Cover: Fire / Ozone / Oil Resistant Neoprene (CR)
    • Temperature: -4° F to +212° F
    • Approval:United Stated Coast Guard Approved (USCG Approved)
    Download Product Specifications Sheet
    ALL TEMP 1-Wire Braid Textile Cover

    ALL TEMP 1-Wire Braid Textile Cover

    Approvals

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A803-04

    HT1-04

    3/16

    0.52

    3,000

    12,000

    3.00

    0.16

    A803-05

    HT1-05

    1/4

    0.58

    3,000

    12,000

    3.38

    0.18

    A803-06

    HT1-06

    5/16

    0.67

    2,250

    9,000

    4.00

    0.23

    A803-08

    HT1-08

    13/32

    0.77

    2,000

    8,000

    4.62

    0.27

    A803-10

    HT1-10

    1/2

    0.92

    1,750

    7,000

    5.50

    0.36

    A803-12

    HT1-12

    5/8

    1.08

    1,500

    6,000

    6.50

    0.44

     

    1803-16

    HT1-16

    7/8

    1.23

    800

    3,200

    7.38

    0.45

     

    1803-20

    HT1-20

    1-1/8

    1.50

    625

    2,500

    9.00

    0.56

     

    1803-24

    HT1-24

    1-3/8

    1.75

    500

    2,000

    10.50

    0.64

     

    1803-32

    HT1-32

    1-13/16

    2.22

    350

    1,400

    13.25

    0.90

     

    1803-40

    HT1-40

    2-3/8

    2.87

    350

    1,400

    24.00

    1.36
    • Recommended for:High temperature, medium pressure hydraulic applications using petroleum base hydraulic fluids. Also for gasoline, diesel fuel, oil, water, and air. Meets SAE 100R5 and SAE J1402 type A11 for hydraulic service in all sizes. Meets the requirements
      of DOT FMVSS 106 type A11 for truck air brake
      specifications in sizes 3/16° thru 5/8°. Also approved by AAMVA for air brake service. USCG Approved.
    • Tube:Black, oil resistant, high temperature Nitrile (NBR)
    • Reinforcement:One high tensile steel wire braid over one polyester braid. Friction layers under and over wire braid to improve tube and cover adhesion.
    • Cover:Blue, oil resistant polyester braid impregnated with Neoprene (CR).
    • Temperature:-40° F to +300° F
    • Approval: United Stated Coast Guard Approved (hose or hose assembly must be covered with an MSHA-approved sleeve to qualify for United States Coast Guard Approval)

     Download Product Specifications Sheet

    Mil-DTL-13444 Type I1-Braid Textile

    Mil-DTL-13444 Type I1-Braid Textile

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    B007-03

    3/16

    0.440

    425

    1,700

    2.00

    0.072

    B007-04

    1/4

    0.520

    300

    1,250

    2.25

    0.094

    B007-05

    5/16

    0.570

    275

    1,100

    2.75

    0.101

    B007-06

    3/8

    0.640

    250

    1,000

    3.00

    0.125

    B007-08

    1/2

    0.780

    200

    750

    3.75

    0.166

    B007-10

    5/8

    0.970

    175

    700

    4.75

    0.254

    B007-12

    3/4

    1.095

    125

    500

    5.50

    0.287
    • Recommended for:Low and high temperature
      service at medium pressure hydraulic applications
      using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type I
    • Tube:Black, oil resistant, all temperature Nitrile (NBR).
    • Reinforcement:One high tensile textile braid.
    • Cover:Black oil and abrasion resistant Neoprene (CR).
    • Temperature:-65° F to 250° F
    Mil-DTL-13444 Type III

    Mil-DTL-13444 Type III

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A805-04

    3/16

    0.49

    1,500

    6,000

    0.75

    0.12

    A805-05

    1/4

    0.55

    1,500

    6,000

    1.00

    0.14

    A805-06

    5/16

    0.62

    1,000

    4,000

    1.25

    0.16

    A805-08

    13/32

    0.74

    1,000

    4,000

    1.75

    0.20

    A805-10

    1/2

    0.83

    875

    3,500

    2.25

    0.23

    A805-12

    5/8

    0.96

    750

    3,000

    2.75

    0.26

    1805-16

    7/8

    1.21

    375

    1,500

    3.50

    0.34

    1805-20

    1-1/8

    1.49

    300

    1,250

    4.50

    0.46

    1805-24

    1-3/8

    1.72

    250

    1,000

    7.50

    0.62

    1805-32

    1-13/16

    2.14

    200

    750

    14.00

    0.99
    • Recommended for: Low and high temperature
      service at medium pressure hydraulic applications
      using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type III
    • Tube:Black, oil resistant Nitrile (NBR).
    • Reinforcement:Inner ply of fabric braid and single high tensile wire braid.
    • Cover:Black oil resistant rubber impregnated fabric.
    • Temperature:-55° F to 300° F
    Mil-H-13531 Type I Class A

    Mil-H-13531 Type I Class A

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A012-03

    3/16

    0.5

    3,000

    12,000

    3.5

    0.14

    A012-04

    1/4

    0.62

    2,750

    11,000

    4.0

    0.21

    A012-05

    5/16

    0.69

    2,500

    10,000

    4.5

    0.23

    A012-06

    3/8

    0.78

    2,250

    9,000

    5.0

    0.28

    A012-08

    1/2

    0.9

    2,000

    8,000

    7.0

    0.35

    A012-10

    5/8

    1.03

    1,500

    6,000

    8.0

    0.42

    A012-12

    3/4

    1.18

    1,250

    5,000

    9.5

    0.50

    A012-16

    1

    1.49

    1,000

    4,000

    12.0

    0.73

    1012-20

    1-1/4

    1.8

    625

    2,500

    16.5

    1.03

    1012-24

    1-1/2

    2.06

    500

    2,000

    20.0

    1.18

    1012-32

    2

    2.63

    375

    1,500

    25.0

    1.65
    • Recommended for: Applications which meet or
      exceed SAE 100R1 Type A. Medium pressure
      hydraulic oil lines.
    • Tube:Black, oil resistant Nitrile (NBR).
    • Reinforcement:One wire braid of high tensile steel.
    • Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved
    • Temperature:-65° F to 250° F
    Mil-H-13531 Type II Class A

    Mil-H-13531 Type II Class A

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A013-03

    3/16

    0.61

    5,000

    20,000

    3.5

    0.25

    A013-04

    1/4

    0.69

    5,000

    20,000

    4.0

    0.31

    A013-05

    5/16

    0.74

    4,250

    17,000

    4.5

    0.32

    A013-06

    3/8

    0.84

    4,000

    16,000

    5.0

    0.39

    A013-08

    1/2

    0.95

    3,500

    14,000

    7.0

    0.47

    A013-10

    5/8

    1.09

    2,750

    11,000

    8.0

    0.58

    A013-12

    3/4

    1.26

    2,250

    9,000

    9.5

    0.67

    A013-16

    1

    1.55

    2,000

    8,000

    12.0

    0.99

    1013-20

    1-1/4

    2.00

    1,625

    6,500

    16.5

    1.65

    1013-24

    1-1/2

    2.25

    1,250

    5,000

    20.0

    1.90

    1013-32

    2

    2.75

    1,125

    4,500

    25.0

    2.34
    • Recommended for:Applications which meet or
      exceed SAE 100R2 Type A. Medium pressure
      hydraulic oil lines.
    • Tube:Black, oil resistant, all temperature Nitrile (NBR).
    • Reinforcement:Two wire braid of high tensile steel.
    • Cover:Black, oil and abrasion resistant Neoprene (CR).
    • Temperature:-65° F to 250° F
    Non-Conductive - Twin-Line Hydraulic Tool Assemblies

    Non-Conductive - Twin-Line Hydraulic Tool Assemblies

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    B098-06

    TL-06

    3/8

    3/4

    2,250

    9,000

    5

    0.19
    • Tube:Oil resistant Nitrile (NBR).
    • Reinforcement:Non-conductive textile braid.
    • Cover:Orange oil, abrasion, and weather resistant NBR/PVC
    • Temperature:-40° F to +200° F
    • Assembly Length:Per customer specifications.
    • Assembly Features:Factory made and certified, non-conductive to 75,000 volts. Coupled with NPT male fittings. Includes vinyl bend restrictors.
    SAE 100R1 WearGuard NRP 1-Wire Braid Non-Skive

    SAE 100R1 WearGuard NRP 1-Wire Braid Non-Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A101-03

    R1-03

    3/16

    0.47

    3,000

    12,000

    3.50

    0.13

    A101-04

    R1-04

    1/4

    0.53

    2,750

    11,000

    4.00

    0.16

    A101-05

    R1-05

    5/16

    0.59

    2,500

    10,000

    4.50

    0.17

    A101-06

    R1-06

    3/8

    0.68

    2,250

    9,000

    5.00

    0.22
                   

    A101-08

    R1-08

    1/2

    0.80

    2,000

    8,000

    7.00

    0.28

    A101-10

    R1-10

    5/8

    0.93

    1,500

    6,000

    8.00

    0.34

    A101-12

    R1-12

    3/4

    1.09

    1,250

    5,000

    9.50

    0.41

    A101-16

    R1-16

    1

    1.41

    1,000

    4,000

    12.00

    0.63
                   

    1101-20

    R1-20

    1-1/4

    1.72

    625

    2,500

    16.50

    0.91

    1101-24

    R1-24

    1-1/2

    2.00

    500

    2,000

    20.00

    1.07

    1101-32

    R1-32

    2

    2.54

    375

    1,500

    25.00

    1.44
    • Recommended for:Medium pressure hydraulic oil lines. Meets or exceeds requirements of SAE 100R1.
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:One braid of high tensile steel wire
    • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +250° F
    SAE 100R14 P.T.F.E. Type A

    SAE 100R14 P.T.F.E. Type A

    Part
    Number

    Jones ID#

    Dash
    Size

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    6014-04

    PTFE-04

    4

    3/16

    0.30

    3,000

    12,000

    2.00

    6014-05

    PTFE-05

    5

    1/4

    0.35

    3,000

    12,000

    3.00

    6014-06

    PTFE-06

    6

    5/16

    0.43

    2,540

    10,160

    4.00

    6014-07

    PTFE-07

    7

    3/8

    0.48

    2,390

    9,560

    5.00

    6014-08

    PTFE-08

    8

    13/32

    0.54

    2,030

    8,120

    5.40

    6014-10

    PTFE-10

    10

    1/2

    0.64

    1,740

    6,960

    6.60

    6014-12

    PTFE-12

    12

    5/8

    0.74

    1,270

    5,080

    8.00

    6014-14

    PTFE-14

    14

    3/4

    0.91

    1,010

    4,040

    9.20

    6014-16

    PTFE-16

    16

    7/8

    1.03

    870

    3,480

    9.20

    6014-18

    PTFE-18

    18

    1

    1.15

    870

    3,480

    12.00

    6014-20

    PTFE-20

    20

    1-1/8

    1.30

    630

    2,520

    16.40
    • Recommended for:High and low pressure applications with excellent chemical resistant properties. Exceeds requirements of SAE 100R14 Type A.
    • Tube:PolyTetraFluoroEthylene (P.T.F.E.)
    • Reinforcement:Single braid of 303/304 series stainless steel wire.
    • Temperature:-65° F to +500° F.
    • Note:For specific technical data, refer to SAE 100R14 specifications.
    SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

    SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A151-04

    R17-04

    1/4

    0.53

    3,000

    12,000

    2.00

    0.16

    A151-06

    R17-06

    3/8

    0.68

    3,000

    12,000

    2.50

    0.23

    A151-08

    R17-08

    1/2

    0.80

    3,000

    12,000

    3.50

    0.28

    A151-10

    R17-10

    5/8

    1.00

    3,000

    12,000

    4.00

    0.49

    A151-12

    R17-12

    3/4

    1.16

    3,000

    12,000

    4.75

    0.57

    A151-16

    R17-16

    1

    1.49

    3,000

    12,000

    6.00

    0.90
    • Recommended for:Applications which meet or exceed SAE 100R17. Medium pressure hydraulic oil lines
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:One wire high tensile steel braid in sizes 1/4 through 1/2". Two wire high tensile steel braid in sizes 5/8-1".
    • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to 250° F
    SAE 100R5 NRP 1-Wire Braid Textile Cover

    SAE 100R5 NRP 1-Wire Braid Textile Cover

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A005-04

    R5-04

    3/16

    0.52

    3,000

    12,000

    3.00

    0.16

    A005-05

    R5-05

    1/4

    0.58

    3,000

    12,000

    3.38

    0.18

    A005-06

    R5-06

    5/16

    0.67

    2,250

    9,000

    4.00

    0.23

    A005-08

    R5-08

    13/32

    0.77

    2,000

    8,000

    4.62

    0.27

    A005-10

    R5-10

    1/2

    0.92

    1,750

    7,000

    5.50

    0.36

    A005-12

    R5-12

    5/8

    1.08

    1,500

    6,000

    6.50

    0.44

    1005-16

    R5-16

    7/8

    1.23

    800

    3,200

    7.38

    0.45

    1005-20

    R5-20

    1-1/8

    1.50

    625

    2,500

    9.00

    0.56

    1005-24

    R5-24

    1-3/8

    1.75

    500

    2,000

    10.50

    0.64

    1005-32

    R5-32

    1-13/16

    2.22

    350

    1,400

    13.25

    0.83

    1005-40

    R5-40

    2-3/8

    2.88

    350

    1,400

    24.00

    1.30
    • Recommended for:Medium pressure hydraulic
      applications using petroleum based hydraulic fluids. Also for gasoline, water, air and truck air brake
      applications. Meets and exceeds the requirements
      of SAE 100R5 and SAE J1402 type A11 for hydraulic service in all sizes. Meets and exceeds the
      requirements of DOT FMVSS 106 type A11 for the truck air brake applications in sizes 3/16° thru 5/8°.
    • Tube:Black, oil resistant, high temperature Nitrile (NBR)
    • Reinforcement:One high tensile steel wire braid over one polyester braid. Friction layers under and over wire braid to improve tube and cover adhesion.
    • Cover:Oil resistant polyester braid impregnated with Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +275° F; +300° F intermittent.
    • Approval:AAMVA for air brake service.
    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

    Black Part
    Number

    Black Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3107N-04

    3307N-04

    1/4

    0.49

    2,750

    11,000

    1.3

    3107N-05

    3307N-05

    5/16

    0.56

    2,500

    10,000

    1.8

    3107N-06

    3307N-06

    3/8

    0.62

    2,250

    9,000

    2.2

    3107N-08

    3307N-08

    1/2

    0.76

    2,050

    8,200

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One synthetic fiber braid.
    • Cover:Black, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +248° F
    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

    Orange Non-
    Conductive Part Number

    Orange Non-
    Conductive Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3207N-04

    3407N-04

    1/4

    0.49

    2,750

    11,000

    1.3

    -

    -

    5/16

    0.56

    2,500

    10,000

    1.8

    3207N-06

    3407N-06

    3/8

    0.62

    2,250

    9,000

    2.2

    3207N-08

    3407N-08

    1/2

    0.76

    2,050

    8,200

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One synthetic fiber braid.
    • Cover:Orange, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +248° F
    SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

    SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

    Orange Non-
    Conductive Part Number

    Orange Non-
    Conductive Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3208N-04

    3408N-04

    1/4

    0.49

    5,000

    20,000

    1.3

    -

    -

    5/16

    0.56

    4,300

    17,200

    1.8

    3208N-06

    3408N-06

    3/8

    0.62

    4,000

    16,000

    2.2

    3208N-08

    3408N-08

    1/2

    0.76

    3,500

    14,000

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One aramid fiber braid.
    • Cover:Orange, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.
    SAE 100R8 High PressureThermoplastic Hydraulic Hose

    SAE 100R8 High PressureThermoplastic Hydraulic Hose

    Black Part
    Number

    Black Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3108N-04

    3308N-04

    1/4

    0.49

    5,000

    20,000

    1.3

    3108N-05

    3308N-05

    5/16

    0.56

    4,300

    17,200

    1.8

    3108N-06

    3308N-06

    3/8

    0.62

    4,000

    16,000

    2.2

    3108N-08

    3308N-08

    1/2

    0.76

    3,500

    14,000

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One aramid fiber braid.
    • Cover:Black, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.
    A160 LOW TEMP HOSE

    A160 LOW TEMP HOSE

    Part
    Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A160-04

    1/4

    0.57

    5,800

    23,200

    2.00

    0.22

    A160-06

    3/8

    0.72

    5,000

    19,200

    2.50

    0.32

    A160-08

    1/2

    0.84

    4,000

    16,000

    3.50

    0.41

    A160-12

    3/4

    1.10

    3,000

    12,400

    4.75

    0.63

    A160-16

    1

    1.41

    2,400

    9,600

    6.00

    0.83

    1160-20

    1-1/4

    1.72

    1,825

    7,300

    8.25

    1.08
    • Recommended for:Low temperature applications which meet or exceed SAE 100R16. Medium pressure hydraulic oil lines.
    • Tube:Black, oil resistant specialty Nitrile (NBR) compound for low temperature applications.
    • Reinforcement:Two wire braid of high tensile steel.
    • Cover:Black, oil resistant specialty Neoprene (CR) compound for low temperature applications.
    • Temperature:-67° F to +212° F (-55° C to 100° C)

    Download Product Specifications Sheet

    DIN 20022-2SN Hydra-Max NRP 2-Wire Braid Non Skive

    DIN 20022-2SN Hydra-Max NRP 2-Wire Braid Non Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A750-04

    2SN-04

    1/4

    0.59

    5,500

    22,000

    4.00

    0.25

    A750-06

    2SN-06

    3/8

    0.75

    5,000

    20,000

    5.00

    0.32

    A750-08

    2SN-08

    1/2

    0.86

    5,000

    20,000

    7.00

    0.40

    A750-10

    2SN-10

    5/8

    1.00

    3,500

    14,000

    8.00

    0.49

    A750-12

    2SN-12

    3/4

    1.16

    3,000

    12,000

    9.50

    0.57

    A750-16

    2SN-16

    1

    1.49

    2,750

    11,000

    12.00

    0.90

    1750-20

    2SN-20

    1-1/4

    1.90

    1,800

    7,200

    16.50

    1.47

    1750-24

    2SN-24

    1-1/2

    2.15

    1,300

    5,200

    25.00

    1.70

    1750-32

    2SN-32

    2

    2.68

    1,160

    4,640

    25.00

    2.34
    • Recommended for:High pressure hydraulic
      applications. Meets or exceeds DIN 20022-2SN
      performance specifications.
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two wire braid of high tensile steel.
    • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to 250° F
    HIGH TEMP II 2-Wire Braid Non Skive

    HIGH TEMP II 2-Wire Braid Non Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A807-04

    HT2-04

    1/4

    0.59

    5,000

    20,000

    4.00

    0.25

    A807-06

    HT2-06

    3/8

    0.75

    4,000

    16,000

    5.00

    0.32

    A807-08

    HT2-08

    1/2

    0.86

    3,500

    14,000

    7.00

    0.40

    A807-12

    HT2-12

    3/4

    1.16

    2,250

    9,000

    9.50

    0.57

    A807-16

    HT2-16

    1

    1.49

    2,000

    8,000

    12.00

    0.90

    1807-20

    HT2-20

    1-1/4

    1.90

    1,625

    6,500

    16.50

    1.47

    1807-24

    HT2-24

    1-1/2

    2.15

    1,250

    5,000

    25.00

    1.70

    1807-32

    HT2-32

    2

    2.66

    1,125

    4,500

    25.00

    2.34
    • Recommended for:Recommended for: High temperature, medium pressure hydraulic applications using petroleum base hydraulic fluids. Also for gasoline, diesel fuel, oil, water, and air. Dimensions and working pressures are
      the same as SAE 100R2AT.
    • Tube:Black, oil resistant, synthetic Nitrile (NBR))
    • Reinforcement:Two high tensile steel wire braids.
    • Cover:Blue, oil and abrasion resistant, Neoprene (CR).
    • Temperature:-40° F to +300° F
    Power Jack Hose NRP No. A320

    Power Jack Hose NRP No. A320

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A320-04

    PJ-04

    1/4

    0.59

    10,000

    20,000

    4.0

    0.25

    A320-06

    PJ-06

    3/8

    0.75

    10,000

    20,000

    5.0

    0.32
    • Recommended for: Hydraulic jack applications. Meets Material Handling Institute specification IJ100 for hydraulic hose and assemblies for jacking systems.
    • Tube:Black, oil resistant, Nitrile (NBR).
    • Reinforcement:Two braids of high tensile steel wire.
    • Cover:Black, neoprene, compounded to resist abrasion, oil , and weather.
    • Temperature:-40° F to +250° F
    SAE 100R16 WearGuard (Hydra-Lite II) NRP 2 Wire Braid Non Skive

    SAE 100R16 WearGuard (Hydra-Lite II) NRP 2 Wire Braid Non Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A150-04

    R16-04

    1/4

    0.57

    5,800

    23,200

    2.00

    0.24

    A150-06

    R16-06

    3/8

    0.72

    4,800

    19,200

    2.50

    0.30

    A150-08

    R16-08

    1/2

    0.84

    4,000

    16,000

    3.50

    0.39

    A150-10

    R16-10

    5/8

    0.98

    3,500

    14,500

    4.00

    0.47

    A150-12

    R16-12

    3/4

    1.10

    3,000

    12,400

    4.75

    0.55

    A150-16

    R16-16

    1

    1.41

    2,400

    9,600

    6.00

    0.82
    • Recommended for:Applications which meet or exceed SAE 100R16. Medium pressure hydraulic oil lines
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two wire braid of high tensile steel.
    • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to 250° F
    SAE 100R16 WearGuard Plus NRP 2-Wire Braid Non Skive

    SAE 100R16 WearGuard Plus NRP 2-Wire Braid Non Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A250-04

    R16-04+

    1/4

    0.57

    5,800

    23,200

    2.00

    0.24

    A250-06

    R16-06+

    3/8

    0.72

    4,800

    19,200

    2.50

    0.30

    A250-08

    R16-08+

    1/2

    0.84

    4,000

    16,000

    3.50

    0.39

    A250-10

    R16-10+

    5/8

    0.98

    3,500

    14,500

    4.00

    0.47

    A250-12

    R16-12+

    3/4

    1.10

    3,000

    12,400

    4.75

    0.55

    A250-16

    R16-16+

    1

    1.41

    2,400

    9,600

    6.00

    0.82
    • Recommended for:Applications which meet or exceed SAE 100R16. Medium pressure hydraulic oil lines
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two wire braid of high tensile steel.
    • WearGuard Cover:Black, oil and extreme abrasion resistant Neoprene (CR).
    • Temperature:-40° F to 250° F
    SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

    SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A151-04

    R17-04

    1/4

    0.53

    3,000

    12,000

    2.00

    0.16

    A151-06

    R17-06

    3/8

    0.68

    3,000

    12,000

    2.50

    0.23

    A151-08

    R17-08

    1/2

    0.80

    3,000

    12,000

    3.50

    0.28

    A151-10

    R17-10

    5/8

    1.00

    3,000

    12,000

    4.00

    0.49

    A151-12

    R17-12

    3/4

    1.16

    3,000

    12,000

    4.75

    0.57

    A151-16

    R17-16

    1

    1.49

    3,000

    12,000

    6.00

    0.90
    • Recommended for:Applications which meet or exceed SAE 100R17. Medium pressure hydraulic oil lines
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:One wire high tensile steel braid in sizes 1/4 through 1/2". Two wire high tensile steel braid in sizes 5/8-1".
    • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to 250° F
    SAE 100R2 WearGuard NRP 2-Wire Braid Non-Skive

    SAE 100R2 WearGuard NRP 2-Wire Braid Non-Skive

    Approvals

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend
    Radius (in.)

    Wt. Per
    Ft. (lbs)

     

    A102-03

    R2-03

    3/16

    0.53

    6,000

    24,000

    3.50

    0.20

     

    A102-04

    R2-04

    1/4

    0.59

    5,800

    23,200

    4.00

    0.25

     

    A102-05

    R2-05

    5/16

    0.65

    5,050

    20,200

    4.50

    0.27

    A102-06

    R2-06

    3/8

    0.75

    5,000

    20,000

    5.00

    0.32

    A102-08

    R2-08

    1/2

    0.86

    4,000

    16,000

    7.00

    0.40

     

    A102-10

    R2-10

    5/8

    1.00

    3,500

    14,500

    8.00

    0.49

    A102-12

    R2-12

    3/4

    1.16

    3,000

    12,400

    9.50

    0.57

    A102-16

    R2-16

    1

    1.49

    2,400

    9,600

    12.00

    0.90

     

    1102-20

    R2-20

    1-1/4

    1.90

    1,825

    7,300

    16.50

    1.47

     

    1102-24

    R2-24

    1-1/2

    2.15

    1,300

    5,200

    25.00

    1.70

     

    1102-32

    R2-32

    2

    2.66

    1,160

    4,640

    25.00

    2.34
    • Recommended for:High pressure hydraulic oil lines. Meets or exceeds requirements of SAE 100R2.
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two braids of high tensile steel wire
    • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +250° F
    • Approval:United Stated Coast Guard Approved (USCG Approved)
    SAE 100R3 NRP 2-Textile Braid

    SAE 100R3 NRP 2-Textile Braid

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    B003-03

    R3-03

    3/16

    0.50

    1,500

    6,000

    3.00

    0.10

    B003-04

    R3-04

    1/4

    0.56

    1,250

    5,000

    3.00

    0.12

    B003-06

    R3-06

    3/8

    0.75

    1,125

    4,500

    4.00

    0.18

    B003-08

    R3-08

    1/2

    0.94

    1,000

    4,000

    5.00

    0.29

    B003-12

    R3-12

    3/4

    1.25

    750

    3,000

    6.00

    0.45

    B003-16

    R3-16

    1

    1.50

    565

    2,250

    8.00

    0.57

    2003-20

    R3-20

    1-1/4

    1.75

    375

    1,500

    10.00

    0.65
    • Recommended for:Petroleum and water based
      hydraulic fluids, anti-freeze and water. Meets or
      exceeds requirements for SAE 100R3.
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two textile braids, pre-treated for tube and cover adhesion.
    • Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +200° F
    SAE 100R4 NRP Suction and Return

    SAE 100R4 NRP Suction and Return

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst
    (psi)

    Rated suction
    (in./hg.)

    Min. Bend
    Radius (in.)

    Wt. Per
    Ft. (lbs)

    2004-12

    R4-12

    3/4

    1.24

    300

    1,200

    25.00

    5.0

    0.42

    2004-16

    R4-16

    1

    1.53

    250

    1,000

    25.00

    6.0

    0.57

    2004-20

    R4-20

    1-1/4

    1.78

    200

    800

    25.00

    8.0

    0.67

    2004-24

    R4-24

    1-1/2

    2.07

    150

    600

    25.00

    10.0

    0.84

    2004-32

    R4-32

    2

    2.54

    100

    400

    25.00

    12.0

    1.03

    2004-40

    R4-40

    2-1/2

    3.12

    62

    250

    25.00

    14.0

    1.70

    2004-48

    R4-48

    3

    3.62

    56

    225

    25.00

    18.0

    1.98

    2004-56

    R4-56

    3-1/2

    4.14

    45

    180

    25.00

    21.0

    2.34

    2004-64

    R4-64

    4

    4.70

    35

    140

    25.00

    24.0

    3.03
    • Recommended for:Petroleum and water based hydraulic fluids, in low pressure and vacuum service. Especially recommended for return lines in hydraulic control systems. Meets or exceeds requirements of SAE 100R4
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two textile braids, pre-treated for tube and cover adhesion. Helix wires are located between the braids to resist collapse under vacuum or bending.
    • Cover:Black, oil and weather resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +200° F
    SUPERFLEX No. 2014 NRP Suction and Return

    SUPERFLEX No. 2014 NRP Suction and Return

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Rated suction
    (in./hg.)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    2014-12

    SF-12

    3/4

    1.20

    300

    1,200

    25.00

    2.5

    0.40

    2014-16

    SF-16

    1

    1.49

    250

    1,000

    25.00

    3.0

    0.54

    2014-20

    SF-20

    1-1/4

    1.78

    200

    800

    25.00

    4.0

    0.66

    2014-24

    SF-24

    1-1/2

    2.06

    150

    600

    25.00

    5.0

    0.87

    2014-32

    SF-32

    2

    2.54

    100

    400

    25.00

    6.0

    1.36

    2014-40

    SF-40

    2-1/2

    3.02

    62

    250

    25.00

    7.0

    1.72
    • Recommended for:Petroleum and water based hydraulic fluids, in low pressure and return line service. Minimum bend radius one half the bend radius of SAE 100R4.
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Two textile braids, pre-treated for tube and cover adhesion. Helix wires are located between the braids to resist collapse under vacuum or bending.
    • Cover:Black, oil and weather resistant Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +212° F
    • Branding:Green Mylar "NRP Superflex Return Line"
    NRP Jones High Pressure 4 Spiral Hose DIN EN 856 4SH

    NRP Jones High Pressure 4 Spiral Hose DIN EN 856 4SH

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1312-10SH

    4SH-10

    5/8

    1.09

    6,090

    20,305

    9.84

    0.66

    1312-12SH

    4SH-12

    3/4

    1.26

    6,090

    24,366

    11.02

    0.96

    1312-16SH

    4SH-16

    1

    1.52

    5,510

    22,046

    13.38

    1.48

    1312-20SH

    4SH-20

    1-1/4

    1.78

    5,075

    20,015

    18.11

    1.73

    1312-24SH

    4SH-24

    1-1/2

    2.10

    4,200

    16,824

    22.05

    2.22

    1312-32SH

    4SH-32

    2

    2.64

    3,625

    14,503

    27.55

    3.32
    • Tube:Synthetic rubber, resistant against hydraulic fluids
    • Reinforcement:4 high tensile steel wire spiral layers
    • Cover:Black, abrasion and ozone resistant synthetic rubber - MSHA approved. Yellow Mylar lay line.
    • Temperature:-40° F to 212° F (max 248° F intermittent)
    • Lengths:Hose supplied in random lengths.
    SAE 100R12 - FLEX PLUS 4 Spiral Jones 9-Lives

    SAE 100R12 - FLEX PLUS 4 Spiral Jones 9-Lives

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1212-06

    9LIVESR12-06

    3/8

    0.797

    4,000

    16,000

    2.50

    0.40

    1212-08

    9LIVESR12-08

    1/2

    0.935

    4,000

    16,000

    3.50

    0.54

    1212-10

    9LIVESR12-10

    5/8

    1.080

    4,000

    16,000

    4.00

    0.74

    1212-12

    9LIVESR12-12

    3/4

    1.210

    4,000

    16,000

    4.75

    0.94

    1212-16

    9LIVESR12-16

    1

    1.495

    4,000

    16,000

    6.00

    1.34

    1212-20

    9LIVESR12-20

    1-1/4

    1.850

    3,000

    12,000

    8.25

    1.74

    1212-24

    9LIVESR12-24

    1-1/2

    2.105

    2,500

    10,000

    10.00

    2.01

    1212-32

    9LIVESR12-32

    2

    2.626

    2,500

    10,000

    12.50

    2.75
    • Recommended for:High pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R12 performance and half bend radius.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:Four plies of spirally-wrapped high tensile steel wire.
    • Cover:Black, ultra high abrasion compound which
      is weather and oil resistant. MSHA approved.
      Yellow layline.
    • Temperature:-40° F to 250° F
    • Lengths:Hose supplied in 50' lengths.
    • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
    SAE 100R12 - Jones 4 Spiral

    SAE 100R12 - Jones 4 Spiral

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1312-06

    R12-06

    3/8

    0.80

    4,000

    16,000

    5.00

    0.44

    1312-08

    R12-08

    1/2

    0.94

    4,000

    16,000

    7.00

    0.55

    1312-10

    R12-10

    5/8

    1.08

    4,000

    16,000

    8.00

    0.77

    1312-12

    R12-12

    3/4

    1.21

    4,000

    16,000

    9.50

    0.82

    1312-16

    R12-16

    1

    1.50

    4,000

    16,000

    12.00

    1.28

    1312-20

    R12-20

    1-1/4

    1.85

    3,000

    12,000

    16.50

    1.76

    1312-24

    R12-24

    1-1/2

    2.10

    2,500

    10,000

    20.00

    2.18

    1312-32

    R12-32

    2

    2.62

    2,500

    10,000

    25.00

    2.85
    • Recommended for:High pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Meets or exceeds SAE 100R12.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:Four plies of spirally-wrapped high tensile steel wire.
    • Cover:A synthetic rubber which is weather and
      temperature resistant. MSHA approved.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in random lengths.
    SAE 100R13 - Jones 4 and 6 Spiral

    SAE 100R13 - Jones 4 and 6 Spiral

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1313-12

    R13-12

    3/4

    1.26

    5,000.00

    20,000.00

    9.5

    1.13

    1313-16

    R13-16

    1

    1.52

    5,000.00

    20,000.00

    12.0

    1.35

    1313-20

    R13-20

    1-1/4

    1.96

    5,000.00

    20,000.00

    16.5

    2.41

    1313-24

    R13-24

    1-1/2

    2.26

    5,000.00

    20,000.00

    20.0

    3.21

    1313-32

    R13-32

    2

    2.79

    5,000.00

    20,000.00

    25.0

    4.44
    • Recommended for:Recommended for: Extra high pressure hydraulic oil lines for heavy duty service
      applications with crude oils, fuel oils, lubricating oils, and gasoline. Meets or exceeds SAE 100R13.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
    • Cover:A synthetic rubber which is weather and
      temperature resistant. MSHA approved.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in random lengths.
    SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

    SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1213-12

    R13-12+

    3/4

    1.263

    5,000

    20,000

    4.75

    1.07

    1213-16

    R13-16+

    1

    1.524

    5,000

    20,000

    6.00

    1.48

    1213-20

    R13-20+

    1-1/4

    1.962

    5,000

    20,000

    8.25

    2.48

    1213-24

    R13-24+

    1-1/2

    2.256

    5,000

    20,000

    10.00

    3.22

    1213-32

    R13-32+

    2

    2.800

    5,000

    20,000

    25.00

    5.03
    • Recommended for:Extra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R13 performance and half the bend radius.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
    • Cover:Black ultra high abrasion compound which is weather and oil resistant. MSHA approved. Red layline.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in 50' lengths.
    • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
    SAE 100R13 - Jones 4 and 6 Spiral

    SAE 100R13 - Jones 4 and 6 Spiral

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1313-12

    R13-12

    3/4

    1.26

    5,000.00

    20,000.00

    9.5

    1.13

    1313-16

    R13-16

    1

    1.52

    5,000.00

    20,000.00

    12.0

    1.35

    1313-20

    R13-20

    1-1/4

    1.96

    5,000.00

    20,000.00

    16.5

    2.41

    1313-24

    R13-24

    1-1/2

    2.26

    5,000.00

    20,000.00

    20.0

    3.21

    1313-32

    R13-32

    2

    2.79

    5,000.00

    20,000.00

    25.0

    4.44
    • Recommended for:Recommended for: Extra high pressure hydraulic oil lines for heavy duty service
      applications with crude oils, fuel oils, lubricating oils, and gasoline. Meets or exceeds SAE 100R13.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
    • Cover:A synthetic rubber which is weather and
      temperature resistant. MSHA approved.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in random lengths.
    SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

    SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1213-12

    R13-12+

    3/4

    1.263

    5,000

    20,000

    4.75

    1.07

    1213-16

    R13-16+

    1

    1.524

    5,000

    20,000

    6.00

    1.48

    1213-20

    R13-20+

    1-1/4

    1.962

    5,000

    20,000

    8.25

    2.48

    1213-24

    R13-24+

    1-1/2

    2.256

    5,000

    20,000

    10.00

    3.22

    1213-32

    R13-32+

    2

    2.800

    5,000

    20,000

    25.00

    5.03
    • Recommended for:Extra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R13 performance and half the bend radius.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
    • Cover:Black ultra high abrasion compound which is weather and oil resistant. MSHA approved. Red layline.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in 50' lengths.
    • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
    SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

    SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1211-06

    9LIVESR15-06

    3/8

    0.888

    6,000

    24,000

    3.00

    0.64

    1211-08

    9LIVESR15-08

    1/2

    1.024

    6,000

    24,000

    4.00

    0.78

    1211-12

    9LIVESR15-12

    3/4

    1.378

    6,000

    24,000

    5.25

    1.55

    1211-16

    9LIVESR15-16

    1

    1.614

    6,000

    24,000

    6.50

    1.94

    1211-20

    9LIVESR15-20

    1-1/4

    1.969

    6,000

    24,000

    8.75

    2.68.

    1211-24

    9LIVESR15-24

    1-1/2

    2.290

    6,000

    24,000

    10.50

    3.61

    1211-32

    9LIVESR15-32

    2

    2.797

    6,000

    24,000

    26.00

    4.90
    • Recommended for:Ultra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R15 performance and half the bend radius.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
    • Cover:Black ultra high abrasion compound which
      is weather and oil resistant. MSHA approved.
      White layline.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in 50' lengths.
    • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
    3-Wire Braid NRP High Pressure

    3-Wire Braid NRP High Pressure

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A003-04

    HP3-04

    1/4

    0.75

    7,000

    28,000

    5.00

    0.42

    A003-06

    HP3-06

    3/8

    0.91

    5,500

    22,000

    6.00

    0.59

    A003-08

    HP3-08

    1/2

    1.10

    5,000

    20,000

    8.00

    0.75

    A003-12

    HP3-12

    3/4

    1.32

    4,000

    16,000

    11.00

    1.02

    1003-16

    HP3-16

    1

    1.66

    3,500

    14,000

    13.00

    1.51

    1003-20

    HP3-20

    1-1/4

    2.06

    3,000

    12,000

    17.00

    1.96

    1003-24

    HP3-24

    1-1/2

    2.31

    2,000

    8,000

    22.00

    2.37

    1003-32

    HP3-32

    2

    2.75

    2,000

    8,000

    28.00

    2.80
    • Recommended for:Extra high pressure hydraulic oil lines for heavy duty service applications.
    • Tube:Black, oil resistant, Nitrile (NBR)
    • Reinforcement:Three high tensile steel wire braids.
    • Cover:Black, oil and abrasion resistant, Neoprene (CR). MSHA approved.
    • Temperature:-40° F to +250° F
    High Pressure Grease Hose

    High Pressure Grease Hose

    Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min Burst (psi)

    Min Bend Radius (in.)

    GH3107-03

    3/16

    0.39

    3,000

    12,000

    1.0
    • Recommended for: High pressure mini-hydraulic line (210-bar). Suitable for hydraulic application with increased resistance to abrasion for use with petroleum, synthetic or water based fluids. specifically designed for diverse greasing and lubrication applications of industrial, hand held or automatic
    • Tube: Thermoplastic elastomer (TPE).
    • Reinforcement: One braid of synthetic fiber.
    • Cover: Black polyurethane
    • Temperature: -40°F to +140°F continuous
    Jones 2231 Push-On Hose

    Jones 2231 Push-On Hose

    Part Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Max O.P. (psi)

    Wt. Per Ft. (lbs)

    2231-04

    PO-04

    1/4

    1/2

    300

    10

    2231-06

    PO-06

    3/8

    5/8

    300

    13

    2231-08

    PO-08

    1/2

    3/4

    300

    16

    2231-10

    PO-10

    5/8

    29/32

    300

    23

    2231-12

    PO-12

    3/4

    29/32

    300

    26
    • Recommended for:Air, water, oils, coolants,
      gasoline, etc.
    • Tube:Black, seamless, oil resistant nitrile.
    • Reinforcement:One textile spiral.
    • Cover:Gray, oil and water resistant nitrile/PVC/
    • Temperature:-40° F to +200° F
    Mil-DTL-13444 Type I1-Braid Textile

    Mil-DTL-13444 Type I1-Braid Textile

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    B007-03

    3/16

    0.440

    425

    1,700

    2.00

    0.072

    B007-04

    1/4

    0.520

    300

    1,250

    2.25

    0.094

    B007-05

    5/16

    0.570

    275

    1,100

    2.75

    0.101

    B007-06

    3/8

    0.640

    250

    1,000

    3.00

    0.125

    B007-08

    1/2

    0.780

    200

    750

    3.75

    0.166

    B007-10

    5/8

    0.970

    175

    700

    4.75

    0.254

    B007-12

    3/4

    1.095

    125

    500

    5.50

    0.287
    • Recommended for:Low and high temperature
      service at medium pressure hydraulic applications
      using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type I
    • Tube:Black, oil resistant, all temperature Nitrile (NBR).
    • Reinforcement:One high tensile textile braid.
    • Cover:Black oil and abrasion resistant Neoprene (CR).
    • Temperature:-65° F to 250° F
    Mil-DTL-13444 Type III

    Mil-DTL-13444 Type III

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A805-04

    3/16

    0.49

    1,500

    6,000

    0.75

    0.12

    A805-05

    1/4

    0.55

    1,500

    6,000

    1.00

    0.14

    A805-06

    5/16

    0.62

    1,000

    4,000

    1.25

    0.16

    A805-08

    13/32

    0.74

    1,000

    4,000

    1.75

    0.20

    A805-10

    1/2

    0.83

    875

    3,500

    2.25

    0.23

    A805-12

    5/8

    0.96

    750

    3,000

    2.75

    0.26

    1805-16

    7/8

    1.21

    375

    1,500

    3.50

    0.34

    1805-20

    1-1/8

    1.49

    300

    1,250

    4.50

    0.46

    1805-24

    1-3/8

    1.72

    250

    1,000

    7.50

    0.62

    1805-32

    1-13/16

    2.14

    200

    750

    14.00

    0.99
    • Recommended for: Low and high temperature
      service at medium pressure hydraulic applications
      using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type III
    • Tube:Black, oil resistant Nitrile (NBR).
    • Reinforcement:Inner ply of fabric braid and single high tensile wire braid.
    • Cover:Black oil resistant rubber impregnated fabric.
    • Temperature:-55° F to 300° F
    Mil-H-13531 Type I Class A

    Mil-H-13531 Type I Class A

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A012-03

    3/16

    0.5

    3,000

    12,000

    3.5

    0.14

    A012-04

    1/4

    0.62

    2,750

    11,000

    4.0

    0.21

    A012-05

    5/16

    0.69

    2,500

    10,000

    4.5

    0.23

    A012-06

    3/8

    0.78

    2,250

    9,000

    5.0

    0.28

    A012-08

    1/2

    0.9

    2,000

    8,000

    7.0

    0.35

    A012-10

    5/8

    1.03

    1,500

    6,000

    8.0

    0.42

    A012-12

    3/4

    1.18

    1,250

    5,000

    9.5

    0.50

    A012-16

    1

    1.49

    1,000

    4,000

    12.0

    0.73

    1012-20

    1-1/4

    1.8

    625

    2,500

    16.5

    1.03

    1012-24

    1-1/2

    2.06

    500

    2,000

    20.0

    1.18

    1012-32

    2

    2.63

    375

    1,500

    25.0

    1.65
    • Recommended for: Applications which meet or
      exceed SAE 100R1 Type A. Medium pressure
      hydraulic oil lines.
    • Tube:Black, oil resistant Nitrile (NBR).
    • Reinforcement:One wire braid of high tensile steel.
    • Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved
    • Temperature:-65° F to 250° F
    Mil-H-13531 Type II Class A

    Mil-H-13531 Type II Class A

    Part
    Number

    Hose
    I.D. (in.)

    Hose
    O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A013-03

    3/16

    0.61

    5,000

    20,000

    3.5

    0.25

    A013-04

    1/4

    0.69

    5,000

    20,000

    4.0

    0.31

    A013-05

    5/16

    0.74

    4,250

    17,000

    4.5

    0.32

    A013-06

    3/8

    0.84

    4,000

    16,000

    5.0

    0.39

    A013-08

    1/2

    0.95

    3,500

    14,000

    7.0

    0.47

    A013-10

    5/8

    1.09

    2,750

    11,000

    8.0

    0.58

    A013-12

    3/4

    1.26

    2,250

    9,000

    9.5

    0.67

    A013-16

    1

    1.55

    2,000

    8,000

    12.0

    0.99

    1013-20

    1-1/4

    2.00

    1,625

    6,500

    16.5

    1.65

    1013-24

    1-1/2

    2.25

    1,250

    5,000

    20.0

    1.90

    1013-32

    2

    2.75

    1,125

    4,500

    25.0

    2.34
    • Recommended for:Applications which meet or
      exceed SAE 100R2 Type A. Medium pressure
      hydraulic oil lines.
    • Tube:Black, oil resistant, all temperature Nitrile (NBR).
    • Reinforcement:Two wire braid of high tensile steel.
    • Cover:Black, oil and abrasion resistant Neoprene (CR).
    • Temperature:-65° F to 250° F
    Non-Conductive - Twin-Line Hydraulic Tool Assemblies

    Non-Conductive - Twin-Line Hydraulic Tool Assemblies

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    B098-06

    TL-06

    3/8

    3/4

    2,250

    9,000

    5

    0.19
    • Tube:Oil resistant Nitrile (NBR).
    • Reinforcement:Non-conductive textile braid.
    • Cover:Orange oil, abrasion, and weather resistant NBR/PVC
    • Temperature:-40° F to +200° F
    • Assembly Length:Per customer specifications.
    • Assembly Features:Factory made and certified, non-conductive to 75,000 volts. Coupled with NPT male fittings. Includes vinyl bend restrictors.
    NRP Jones Aquablast Extra 12,500 PSI

    NRP Jones Aquablast Extra 12,500 PSI

    Part
    Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    Aquablast
    Stem

    Auablast
    Ferrule

    AB-06

    3/8

    0.83

    12,500

    30,815

    6.10

    0.56

    		 AB06-06MP

    06AB-SL

    AB-08

    1/2

    0.97

    12,500

    30,815

    7.87

    0.80

    		 AB08-08MP

    08AB-SL

    AB-12

    3/4

    1.29

    12,500

    30,815

    9.84

    1.36

    AB12-12MP

    12AB-SL

    AB-16

    1

    1.51

    12,500

    30,815

    11.81

    1.64

    AB16-16MP

    16AB-SL
    • Recommended for: Very high constant pressure hose for water scaling systems. Suitable for passage of water and aqueous solutions
    • Tube: Nitrile.
    • Reinforcement:4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
    • Cover:Black, oil and abrasion resistant, Neoprene.
    • Temperature:-40° F to +176° F
    • Spec:Tested to EN 1829-2
    NRP Jones Aquablast Ultra Hose 16,000 PSI

    NRP Jones Aquablast Ultra Hose 16,000 PSI

    Part
    Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    Aquablast
    Stem

    Auablast
    Ferrule

    ABP-06

    3/8

    0.81

    16,000

    39,875

    6.1

    0.55

    		 ABP06-06MP

    06ABP-SL

    ABP-08

    1/2

    1.06

    16,000

    39,875

    7.87

    1.02

    		 ABP08-08MP

    08ABP-SL

    ABP-08150

    1/2

    1.06

    16,000

    39,875

    7.87

    1.02

    		 ABP08-08MP  08ABP-SL

    ABP-12

    3/4

    1.26

    16,000

    39,875

    12.2

    1.39

    ABP12-12MP

    ABP-12-12FBSPSS

    12ABP-SL

    12ABP-SLSS
    • Recommended for: Very high constant pressure hose for water scaling systems. Suitable for passage of water and aqueous solutions
    • Tube: Nitrile.
    • Reinforcement::4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
    • Cover: Black, oil and abrasion resistant, Neoprene.
    • Temperature:-40° F to +176° F
    • Spec:Tested to EN 1829-2
    Power Jack Hose NRP No. A320

    Power Jack Hose NRP No. A320

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    A320-04

    PJ-04

    1/4

    0.59

    10,000

    20,000

    4.0

    0.25

    A320-06

    PJ-06

    3/8

    0.75

    10,000

    20,000

    5.0

    0.32
    • Recommended for: Hydraulic jack applications. Meets Material Handling Institute specification IJ100 for hydraulic hose and assemblies for jacking systems.
    • Tube:Black, oil resistant, Nitrile (NBR).
    • Reinforcement:Two braids of high tensile steel wire.
    • Cover:Black, neoprene, compounded to resist abrasion, oil , and weather.
    • Temperature:-40° F to +250° F
    SAE 100R14 P.T.F.E. Type A

    SAE 100R14 P.T.F.E. Type A

    Part
    Number

    Jones ID#

    Dash
    Size

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    6014-04

    PTFE-04

    4

    3/16

    0.30

    3,000

    12,000

    2.00

    6014-05

    PTFE-05

    5

    1/4

    0.35

    3,000

    12,000

    3.00

    6014-06

    PTFE-06

    6

    5/16

    0.43

    2,540

    10,160

    4.00

    6014-07

    PTFE-07

    7

    3/8

    0.48

    2,390

    9,560

    5.00

    6014-08

    PTFE-08

    8

    13/32

    0.54

    2,030

    8,120

    5.40

    6014-10

    PTFE-10

    10

    1/2

    0.64

    1,740

    6,960

    6.60

    6014-12

    PTFE-12

    12

    5/8

    0.74

    1,270

    5,080

    8.00

    6014-14

    PTFE-14

    14

    3/4

    0.91

    1,010

    4,040

    9.20

    6014-16

    PTFE-16

    16

    7/8

    1.03

    870

    3,480

    9.20

    6014-18

    PTFE-18

    18

    1

    1.15

    870

    3,480

    12.00

    6014-20

    PTFE-20

    20

    1-1/8

    1.30

    630

    2,520

    16.40
    • Recommended for:High and low pressure applications with excellent chemical resistant properties. Exceeds requirements of SAE 100R14 Type A.
    • Tube:PolyTetraFluoroEthylene (P.T.F.E.)
    • Reinforcement:Single braid of 303/304 series stainless steel wire.
    • Temperature:-65° F to +500° F.
    • Note:For specific technical data, refer to SAE 100R14 specifications.
    SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

    SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

    Part
    Number

    Jones ID#

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    Wt. Per
    Ft. (lbs)

    1211-06

    9LIVESR15-06

    3/8

    0.888

    6,000

    24,000

    3.00

    0.64

    1211-08

    9LIVESR15-08

    1/2

    1.024

    6,000

    24,000

    4.00

    0.78

    1211-12

    9LIVESR15-12

    3/4

    1.378

    6,000

    24,000

    5.25

    1.55

    1211-16

    9LIVESR15-16

    1

    1.614

    6,000

    24,000

    6.50

    1.94

    1211-20

    9LIVESR15-20

    1-1/4

    1.969

    6,000

    24,000

    8.75

    2.68.

    1211-24

    9LIVESR15-24

    1-1/2

    2.290

    6,000

    24,000

    10.50

    3.61

    1211-32

    9LIVESR15-32

    2

    2.797

    6,000

    24,000

    26.00

    4.90
    • Recommended for:Ultra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R15 performance and half the bend radius.
    • Tube:Black, oil resistant, Neoprene (CR)
    • Reinforcement:4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
    • Cover:Black ultra high abrasion compound which
      is weather and oil resistant. MSHA approved.
      White layline.
    • Temperature:-40° F to +250° F
    • Lengths:Hose supplied in 50' lengths.
    • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

    Black Part
    Number

    Black Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3107N-04

    3307N-04

    1/4

    0.49

    2,750

    11,000

    1.3

    3107N-05

    3307N-05

    5/16

    0.56

    2,500

    10,000

    1.8

    3107N-06

    3307N-06

    3/8

    0.62

    2,250

    9,000

    2.2

    3107N-08

    3307N-08

    1/2

    0.76

    2,050

    8,200

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One synthetic fiber braid.
    • Cover:Black, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +248° F
    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

    SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

    Orange Non-
    Conductive Part Number

    Orange Non-
    Conductive Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3207N-04

    3407N-04

    1/4

    0.49

    2,750

    11,000

    1.3

    -

    -

    5/16

    0.56

    2,500

    10,000

    1.8

    3207N-06

    3407N-06

    3/8

    0.62

    2,250

    9,000

    2.2

    3207N-08

    3407N-08

    1/2

    0.76

    2,050

    8,200

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One synthetic fiber braid.
    • Cover:Orange, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +248° F
    SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

    SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

    Orange Non-
    Conductive Part Number

    Orange Non-
    Conductive Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3208N-04

    3408N-04

    1/4

    0.49

    5,000

    20,000

    1.3

    -

    -

    5/16

    0.56

    4,300

    17,200

    1.8

    3208N-06

    3408N-06

    3/8

    0.62

    4,000

    16,000

    2.2

    3208N-08

    3408N-08

    1/2

    0.76

    3,500

    14,000

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One aramid fiber braid.
    • Cover:Orange, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.
    SAE 100R8 High PressureThermoplastic Hydraulic Hose

    SAE 100R8 High PressureThermoplastic Hydraulic Hose

    Black Part
    Number

    Black Twin-Line Part Number

    Hose I.D. (in.)

    Hose O.D. (in.)

    Rated
    W.P. (psi)

    Min. Burst (psi)

    Min. Bend Radius (in.)

    3108N-04

    3308N-04

    1/4

    0.49

    5,000

    20,000

    1.3

    3108N-05

    3308N-05

    5/16

    0.56

    4,300

    17,200

    1.8

    3108N-06

    3308N-06

    3/8

    0.62

    4,000

    16,000

    2.2

    3108N-08

    3308N-08

    1/2

    0.76

    3,500

    14,000

    3.1
    • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
    • Tube:Thermoplastic elastomer.
    • Reinforcement:One aramid fiber braid.
    • Cover:Black, oil and abrasion resistant polyurethane.
    • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.