Request a Quote

NRP Jones ISO-9001:2015 Certified Quality System
API 7K FSL 1 temp range 2 Certified

Hydraulic Hose

NRP Jones offers a full line of standard SAE and specialty hydraulic hoses with both braided and spiral construction including:

2 wire braided

2 wire braided

1 wire braided

1 wire braided

4 wire spiral

4 wire spiral

6 wire spiral

6 wire spiral

Specialty Hydraulic Hose

Specialty Hydraulic Hose Including:

In addition to our standard SAE hoses, NRP Jones offers many specialty hydraulic hoses to meet specific applications.  Including:

  • HydraMax DIN 20022-2SN
  • MIL-H-13531 Type 1
  • Power Jack Hose
  • MIL-H-13531 Type 2
  • 3 Wire Braid
  • Non-Conductive Twin Line
  • 4SH High Pressure Hose
  • Aquablast Ultra and Aquablast Premier Waterblast Hoses
  • High Pressure Isobaric Spiral Hose

Choose a category

A360 Blu Finn Marine Fuel Hose

A360 Blu Finn Marine Fuel Hose

Approvals Part Number Hose I.D. Hose O.D. Working Pressure (psi) Test Pressure (psi) Min Burst Design (psi) Min Bend Radius Weight/FT. (lbs) Temp (°F)
A360-05 1/4” .580 700 1,400 2,800 1 .2 212
A360-06 5/16” .670 700 1,400 2,800 1-1/4 .25 212
A360-08 13/32" .760 700 1,400 2,800 1-3/4 .29 212
A360-10 1/2" .920 700 1,400 2,800 2-1/4 .41 212
A360-12 5/8" 1.070 700 1,400 2,800 2-3/4 .49 212
  A360-16 7/8" 1.240 400 800 1,600 3-1/2 .54 212
  • Recommended for: Marine Fuel & Engine Hose
  • Application(s): Conveying Gas / Diesel Fuel aboard small watercraft (including pleasure-craft)
  • Core: Fuel / Oil Resistant Nitrile Tube
  • Reinforcement: One high tensile steel wire braid
  • Cover: Fire / Ozone / Oil Resistant Neoprene (CR)
  • Temperature: -4° F to +212° F
  • Approval:United Stated Coast Guard Approved (USCG Approved)
Download Product Specifications Sheet
ALL TEMP 1-Wire Braid Textile Cover

ALL TEMP 1-Wire Braid Textile Cover

Approvals

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A803-04

HT1-04

3/16

0.52

3,000

12,000

3.00

0.16

A803-05

HT1-05

1/4

0.58

3,000

12,000

3.38

0.18

A803-06

HT1-06

5/16

0.67

2,250

9,000

4.00

0.23

A803-08

HT1-08

13/32

0.77

2,000

8,000

4.62

0.27

A803-10

HT1-10

1/2

0.92

1,750

7,000

5.50

0.36

A803-12

HT1-12

5/8

1.08

1,500

6,000

6.50

0.44

 

1803-16

HT1-16

7/8

1.23

800

3,200

7.38

0.45

 

1803-20

HT1-20

1-1/8

1.50

625

2,500

9.00

0.56

 

1803-24

HT1-24

1-3/8

1.75

500

2,000

10.50

0.64

 

1803-32

HT1-32

1-13/16

2.22

350

1,400

13.25

0.90

 

1803-40

HT1-40

2-3/8

2.87

350

1,400

24.00

1.36

  • Recommended for:High temperature, medium pressure hydraulic applications using petroleum base hydraulic fluids. Also for gasoline, diesel fuel, oil, water, and air. Meets SAE 100R5 and SAE J1402 type A11 for hydraulic service in all sizes. Meets the requirements
    of DOT FMVSS 106 type A11 for truck air brake
    specifications in sizes 3/16° thru 5/8°. Also approved by AAMVA for air brake service. USCG Approved.
  • Tube:Black, oil resistant, high temperature Nitrile (NBR)
  • Reinforcement:One high tensile steel wire braid over one polyester braid. Friction layers under and over wire braid to improve tube and cover adhesion.
  • Cover:Blue, oil resistant polyester braid impregnated with Neoprene (CR).
  • Temperature:-40° F to +300° F
  • Approval: United Stated Coast Guard Approved (hose or hose assembly must be covered with an MSHA-approved sleeve to qualify for United States Coast Guard Approval)

 Download Product Specifications Sheet

Mil-DTL-13444 Type I1-Braid Textile

Mil-DTL-13444 Type I1-Braid Textile

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

B007-03

3/16

0.440

425

1,700

2.00

0.072

B007-04

1/4

0.520

300

1,250

2.25

0.094

B007-05

5/16

0.570

275

1,100

2.75

0.101

B007-06

3/8

0.640

250

1,000

3.00

0.125

B007-08

1/2

0.780

200

750

3.75

0.166

B007-10

5/8

0.970

175

700

4.75

0.254

B007-12

3/4

1.095

125

500

5.50

0.287

  • Recommended for:Low and high temperature
    service at medium pressure hydraulic applications
    using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type I
  • Tube:Black, oil resistant, all temperature Nitrile (NBR).
  • Reinforcement:One high tensile textile braid.
  • Cover:Black oil and abrasion resistant Neoprene (CR).
  • Temperature:-65° F to 250° F
Mil-DTL-13444 Type III

Mil-DTL-13444 Type III

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A805-04

3/16

0.49

1,500

6,000

0.75

0.12

A805-05

1/4

0.55

1,500

6,000

1.00

0.14

A805-06

5/16

0.62

1,000

4,000

1.25

0.16

A805-08

13/32

0.74

1,000

4,000

1.75

0.20

A805-10

1/2

0.83

875

3,500

2.25

0.23

A805-12

5/8

0.96

750

3,000

2.75

0.26

1805-16

7/8

1.21

375

1,500

3.50

0.34

1805-20

1-1/8

1.49

300

1,250

4.50

0.46

1805-24

1-3/8

1.72

250

1,000

7.50

0.62

1805-32

1-13/16

2.14

200

750

14.00

0.99

  • Recommended for: Low and high temperature
    service at medium pressure hydraulic applications
    using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type III
  • Tube:Black, oil resistant Nitrile (NBR).
  • Reinforcement:Inner ply of fabric braid and single high tensile wire braid.
  • Cover:Black oil resistant rubber impregnated fabric.
  • Temperature:-55° F to 300° F
Mil-H-13531 Type I Class A

Mil-H-13531 Type I Class A

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A012-03

3/16

0.5

3,000

12,000

3.5

0.14

A012-04

1/4

0.62

2,750

11,000

4.0

0.21

A012-05

5/16

0.69

2,500

10,000

4.5

0.23

A012-06

3/8

0.78

2,250

9,000

5.0

0.28

A012-08

1/2

0.9

2,000

8,000

7.0

0.35

A012-10

5/8

1.03

1,500

6,000

8.0

0.42

A012-12

3/4

1.18

1,250

5,000

9.5

0.50

A012-16

1

1.49

1,000

4,000

12.0

0.73

1012-20

1-1/4

1.8

625

2,500

16.5

1.03

1012-24

1-1/2

2.06

500

2,000

20.0

1.18

1012-32

2

2.63

375

1,500

25.0

1.65

  • Recommended for: Applications which meet or
    exceed SAE 100R1 Type A. Medium pressure
    hydraulic oil lines.
  • Tube:Black, oil resistant Nitrile (NBR).
  • Reinforcement:One wire braid of high tensile steel.
  • Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved
  • Temperature:-65° F to 250° F
Mil-H-13531 Type II Class A

Mil-H-13531 Type II Class A

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A013-03

3/16

0.61

5,000

20,000

3.5

0.25

A013-04

1/4

0.69

5,000

20,000

4.0

0.31

A013-05

5/16

0.74

4,250

17,000

4.5

0.32

A013-06

3/8

0.84

4,000

16,000

5.0

0.39

A013-08

1/2

0.95

3,500

14,000

7.0

0.47

A013-10

5/8

1.09

2,750

11,000

8.0

0.58

A013-12

3/4

1.26

2,250

9,000

9.5

0.67

A013-16

1

1.55

2,000

8,000

12.0

0.99

1013-20

1-1/4

2.00

1,625

6,500

16.5

1.65

1013-24

1-1/2

2.25

1,250

5,000

20.0

1.90

1013-32

2

2.75

1,125

4,500

25.0

2.34

  • Recommended for:Applications which meet or
    exceed SAE 100R2 Type A. Medium pressure
    hydraulic oil lines.
  • Tube:Black, oil resistant, all temperature Nitrile (NBR).
  • Reinforcement:Two wire braid of high tensile steel.
  • Cover:Black, oil and abrasion resistant Neoprene (CR).
  • Temperature:-65° F to 250° F
Non-Conductive - Twin-Line Hydraulic Tool Assemblies

Non-Conductive - Twin-Line Hydraulic Tool Assemblies

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

B098-06

TL-06

3/8

3/4

2,250

9,000

5

0.19

  • Tube:Oil resistant Nitrile (NBR).
  • Reinforcement:Non-conductive textile braid.
  • Cover:Orange oil, abrasion, and weather resistant NBR/PVC
  • Temperature:-40° F to +200° F
  • Assembly Length:Per customer specifications.
  • Assembly Features:Factory made and certified, non-conductive to 75,000 volts. Coupled with NPT male fittings. Includes vinyl bend restrictors.
SAE 100R1 WearGuard NRP 1-Wire Braid Non-Skive

SAE 100R1 WearGuard NRP 1-Wire Braid Non-Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A101-03

R1-03

3/16

0.47

3,000

12,000

3.50

0.13

A101-04

R1-04

1/4

0.53

2,750

11,000

4.00

0.16

A101-05

R1-05

5/16

0.59

2,500

10,000

4.50

0.17

A101-06

R1-06

3/8

0.68

2,250

9,000

5.00

0.22

               

A101-08

R1-08

1/2

0.80

2,000

8,000

7.00

0.28

A101-10

R1-10

5/8

0.93

1,500

6,000

8.00

0.34

A101-12

R1-12

3/4

1.09

1,250

5,000

9.50

0.41

A101-16

R1-16

1

1.41

1,000

4,000

12.00

0.63

               

1101-20

R1-20

1-1/4

1.72

625

2,500

16.50

0.91

1101-24

R1-24

1-1/2

2.00

500

2,000

20.00

1.07

1101-32

R1-32

2

2.54

375

1,500

25.00

1.44

  • Recommended for:Medium pressure hydraulic oil lines. Meets or exceeds requirements of SAE 100R1.
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:One braid of high tensile steel wire
  • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +250° F
SAE 100R14 P.T.F.E. Type A

SAE 100R14 P.T.F.E. Type A

Part
Number

Jones ID#

Dash
Size

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

6014-04

PTFE-04

4

3/16

0.30

3,000

12,000

2.00

6014-05

PTFE-05

5

1/4

0.35

3,000

12,000

3.00

6014-06

PTFE-06

6

5/16

0.43

2,540

10,160

4.00

6014-07

PTFE-07

7

3/8

0.48

2,390

9,560

5.00

6014-08

PTFE-08

8

13/32

0.54

2,030

8,120

5.40

6014-10

PTFE-10

10

1/2

0.64

1,740

6,960

6.60

6014-12

PTFE-12

12

5/8

0.74

1,270

5,080

8.00

6014-14

PTFE-14

14

3/4

0.91

1,010

4,040

9.20

6014-16

PTFE-16

16

7/8

1.03

870

3,480

9.20

6014-18

PTFE-18

18

1

1.15

870

3,480

12.00

6014-20

PTFE-20

20

1-1/8

1.30

630

2,520

16.40

  • Recommended for:High and low pressure applications with excellent chemical resistant properties. Exceeds requirements of SAE 100R14 Type A.
  • Tube:PolyTetraFluoroEthylene (P.T.F.E.)
  • Reinforcement:Single braid of 303/304 series stainless steel wire.
  • Temperature:-65° F to +500° F.
  • Note:For specific technical data, refer to SAE 100R14 specifications.
SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A151-04

R17-04

1/4

0.53

3,000

12,000

2.00

0.16

A151-06

R17-06

3/8

0.68

3,000

12,000

2.50

0.23

A151-08

R17-08

1/2

0.80

3,000

12,000

3.50

0.28

A151-10

R17-10

5/8

1.00

3,000

12,000

4.00

0.49

A151-12

R17-12

3/4

1.16

3,000

12,000

4.75

0.57

A151-16

R17-16

1

1.49

3,000

12,000

6.00

0.90

  • Recommended for:Applications which meet or exceed SAE 100R17. Medium pressure hydraulic oil lines
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:One wire high tensile steel braid in sizes 1/4 through 1/2". Two wire high tensile steel braid in sizes 5/8-1".
  • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to 250° F
SAE 100R5 NRP 1-Wire Braid Textile Cover

SAE 100R5 NRP 1-Wire Braid Textile Cover

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A005-04

R5-04

3/16

0.52

3,000

12,000

3.00

0.16

A005-05

R5-05

1/4

0.58

3,000

12,000

3.38

0.18

A005-06

R5-06

5/16

0.67

2,250

9,000

4.00

0.23

A005-08

R5-08

13/32

0.77

2,000

8,000

4.62

0.27

A005-10

R5-10

1/2

0.92

1,750

7,000

5.50

0.36

A005-12

R5-12

5/8

1.08

1,500

6,000

6.50

0.44

1005-16

R5-16

7/8

1.23

800

3,200

7.38

0.45

1005-20

R5-20

1-1/8

1.50

625

2,500

9.00

0.56

1005-24

R5-24

1-3/8

1.75

500

2,000

10.50

0.64

1005-32

R5-32

1-13/16

2.22

350

1,400

13.25

0.83

1005-40

R5-40

2-3/8

2.88

350

1,400

24.00

1.30

  • Recommended for:Medium pressure hydraulic
    applications using petroleum based hydraulic fluids. Also for gasoline, water, air and truck air brake
    applications. Meets and exceeds the requirements
    of SAE 100R5 and SAE J1402 type A11 for hydraulic service in all sizes. Meets and exceeds the
    requirements of DOT FMVSS 106 type A11 for the truck air brake applications in sizes 3/16° thru 5/8°.
  • Tube:Black, oil resistant, high temperature Nitrile (NBR)
  • Reinforcement:One high tensile steel wire braid over one polyester braid. Friction layers under and over wire braid to improve tube and cover adhesion.
  • Cover:Oil resistant polyester braid impregnated with Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +275° F; +300° F intermittent.
  • Approval:AAMVA for air brake service.
SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

Black Part
Number

Black Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3107N-04

3307N-04

1/4

0.49

2,750

11,000

1.3

3107N-05

3307N-05

5/16

0.56

2,500

10,000

1.8

3107N-06

3307N-06

3/8

0.62

2,250

9,000

2.2

3107N-08

3307N-08

1/2

0.76

2,050

8,200

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One synthetic fiber braid.
  • Cover:Black, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +248° F
SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

Orange Non-
Conductive Part Number

Orange Non-
Conductive Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3207N-04

3407N-04

1/4

0.49

2,750

11,000

1.3

-

-

5/16

0.56

2,500

10,000

1.8

3207N-06

3407N-06

3/8

0.62

2,250

9,000

2.2

3207N-08

3407N-08

1/2

0.76

2,050

8,200

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One synthetic fiber braid.
  • Cover:Orange, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +248° F
SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

Orange Non-
Conductive Part Number

Orange Non-
Conductive Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3208N-04

3408N-04

1/4

0.49

5,000

20,000

1.3

-

-

5/16

0.56

4,300

17,200

1.8

3208N-06

3408N-06

3/8

0.62

4,000

16,000

2.2

3208N-08

3408N-08

1/2

0.76

3,500

14,000

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One aramid fiber braid.
  • Cover:Orange, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.
SAE 100R8 High PressureThermoplastic Hydraulic Hose

SAE 100R8 High PressureThermoplastic Hydraulic Hose

Black Part
Number

Black Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3108N-04

3308N-04

1/4

0.49

5,000

20,000

1.3

3108N-05

3308N-05

5/16

0.56

4,300

17,200

1.8

3108N-06

3308N-06

3/8

0.62

4,000

16,000

2.2

3108N-08

3308N-08

1/2

0.76

3,500

14,000

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One aramid fiber braid.
  • Cover:Black, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.
A160 LOW TEMP HOSE

A160 LOW TEMP HOSE

Part
Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A160-04

1/4

0.57

5,800

23,200

2.00

0.22

A160-06

3/8

0.72

5,000

19,200

2.50

0.32

A160-08

1/2

0.84

4,000

16,000

3.50

0.41

A160-12

3/4

1.10

3,000

12,400

4.75

0.63

A160-16

1

1.41

2,400

9,600

6.00

0.83

1160-20

1-1/4

1.72

1,825

7,300

8.25

1.08

  • Recommended for:Low temperature applications which meet or exceed SAE 100R16. Medium pressure hydraulic oil lines.
  • Tube:Black, oil resistant specialty Nitrile (NBR) compound for low temperature applications.
  • Reinforcement:Two wire braid of high tensile steel.
  • Cover:Black, oil resistant specialty Neoprene (CR) compound for low temperature applications.
  • Temperature:-67° F to +212° F (-55° C to 100° C)

Download Product Specifications Sheet

DIN 20022-2SN Hydra-Max NRP 2-Wire Braid Non Skive

DIN 20022-2SN Hydra-Max NRP 2-Wire Braid Non Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A750-04

2SN-04

1/4

0.59

5,500

22,000

4.00

0.25

A750-06

2SN-06

3/8

0.75

5,000

20,000

5.00

0.32

A750-08

2SN-08

1/2

0.86

5,000

20,000

7.00

0.40

A750-10

2SN-10

5/8

1.00

3,500

14,000

8.00

0.49

A750-12

2SN-12

3/4

1.16

3,000

12,000

9.50

0.57

A750-16

2SN-16

1

1.49

2,750

11,000

12.00

0.90

1750-20

2SN-20

1-1/4

1.90

1,800

7,200

16.50

1.47

1750-24

2SN-24

1-1/2

2.15

1,300

5,200

25.00

1.70

1750-32

2SN-32

2

2.68

1,160

4,640

25.00

2.34

  • Recommended for:High pressure hydraulic
    applications. Meets or exceeds DIN 20022-2SN
    performance specifications.
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two wire braid of high tensile steel.
  • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to 250° F
HIGH TEMP II 2-Wire Braid Non Skive

HIGH TEMP II 2-Wire Braid Non Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A807-04

HT2-04

1/4

0.59

5,000

20,000

4.00

0.25

A807-06

HT2-06

3/8

0.75

4,000

16,000

5.00

0.32

A807-08

HT2-08

1/2

0.86

3,500

14,000

7.00

0.40

A807-12

HT2-12

3/4

1.16

2,250

9,000

9.50

0.57

A807-16

HT2-16

1

1.49

2,000

8,000

12.00

0.90

1807-20

HT2-20

1-1/4

1.90

1,625

6,500

16.50

1.47

1807-24

HT2-24

1-1/2

2.15

1,250

5,000

25.00

1.70

1807-32

HT2-32

2

2.66

1,125

4,500

25.00

2.34

  • Recommended for:Recommended for: High temperature, medium pressure hydraulic applications using petroleum base hydraulic fluids. Also for gasoline, diesel fuel, oil, water, and air. Dimensions and working pressures are
    the same as SAE 100R2AT.
  • Tube:Black, oil resistant, synthetic Nitrile (NBR))
  • Reinforcement:Two high tensile steel wire braids.
  • Cover:Blue, oil and abrasion resistant, Neoprene (CR).
  • Temperature:-40° F to +300° F
Power Jack Hose NRP No. A320

Power Jack Hose NRP No. A320

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A320-04

PJ-04

1/4

0.59

10,000

20,000

4.0

0.25

A320-06

PJ-06

3/8

0.75

10,000

20,000

5.0

0.32

  • Recommended for: Hydraulic jack applications. Meets Material Handling Institute specification IJ100 for hydraulic hose and assemblies for jacking systems.
  • Tube:Black, oil resistant, Nitrile (NBR).
  • Reinforcement:Two braids of high tensile steel wire.
  • Cover:Black, neoprene, compounded to resist abrasion, oil , and weather.
  • Temperature:-40° F to +250° F
SAE 100R16 WearGuard (Hydra-Lite II) NRP 2 Wire Braid Non Skive

SAE 100R16 WearGuard (Hydra-Lite II) NRP 2 Wire Braid Non Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A150-04

R16-04

1/4

0.57

5,800

23,200

2.00

0.24

A150-06

R16-06

3/8

0.72

4,800

19,200

2.50

0.30

A150-08

R16-08

1/2

0.84

4,000

16,000

3.50

0.39

A150-10

R16-10

5/8

0.98

3,500

14,500

4.00

0.47

A150-12

R16-12

3/4

1.10

3,000

12,400

4.75

0.55

A150-16

R16-16

1

1.41

2,400

9,600

6.00

0.82

  • Recommended for:Applications which meet or exceed SAE 100R16. Medium pressure hydraulic oil lines
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two wire braid of high tensile steel.
  • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to 250° F
SAE 100R16 WearGuard Plus NRP 2-Wire Braid Non Skive

SAE 100R16 WearGuard Plus NRP 2-Wire Braid Non Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A250-04

R16-04+

1/4

0.57

5,800

23,200

2.00

0.24

A250-06

R16-06+

3/8

0.72

4,800

19,200

2.50

0.30

A250-08

R16-08+

1/2

0.84

4,000

16,000

3.50

0.39

A250-10

R16-10+

5/8

0.98

3,500

14,500

4.00

0.47

A250-12

R16-12+

3/4

1.10

3,000

12,400

4.75

0.55

A250-16

R16-16+

1

1.41

2,400

9,600

6.00

0.82

  • Recommended for:Applications which meet or exceed SAE 100R16. Medium pressure hydraulic oil lines
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two wire braid of high tensile steel.
  • WearGuard Cover:Black, oil and extreme abrasion resistant Neoprene (CR).
  • Temperature:-40° F to 250° F
SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

SAE 100R17 WearGuard (Hydra-Lite I) NRP 1 or 2 Wire Braid Non Skive

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A151-04

R17-04

1/4

0.53

3,000

12,000

2.00

0.16

A151-06

R17-06

3/8

0.68

3,000

12,000

2.50

0.23

A151-08

R17-08

1/2

0.80

3,000

12,000

3.50

0.28

A151-10

R17-10

5/8

1.00

3,000

12,000

4.00

0.49

A151-12

R17-12

3/4

1.16

3,000

12,000

4.75

0.57

A151-16

R17-16

1

1.49

3,000

12,000

6.00

0.90

  • Recommended for:Applications which meet or exceed SAE 100R17. Medium pressure hydraulic oil lines
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:One wire high tensile steel braid in sizes 1/4 through 1/2". Two wire high tensile steel braid in sizes 5/8-1".
  • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to 250° F
SAE 100R2 WearGuard NRP 2-Wire Braid Non-Skive

SAE 100R2 WearGuard NRP 2-Wire Braid Non-Skive

Approvals

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend
Radius (in.)

Wt. Per
Ft. (lbs)

 

A102-03

R2-03

3/16

0.53

6,000

24,000

3.50

0.20

 

A102-04

R2-04

1/4

0.59

5,800

23,200

4.00

0.25

 

A102-05

R2-05

5/16

0.65

5,050

20,200

4.50

0.27

A102-06

R2-06

3/8

0.75

5,000

20,000

5.00

0.32

A102-08

R2-08

1/2

0.86

4,000

16,000

7.00

0.40

 

A102-10

R2-10

5/8

1.00

3,500

14,500

8.00

0.49

A102-12

R2-12

3/4

1.16

3,000

12,400

9.50

0.57

A102-16

R2-16

1

1.49

2,400

9,600

12.00

0.90

 

1102-20

R2-20

1-1/4

1.90

1,825

7,300

16.50

1.47

 

1102-24

R2-24

1-1/2

2.15

1,300

5,200

25.00

1.70

 

1102-32

R2-32

2

2.66

1,160

4,640

25.00

2.34

  • Recommended for:High pressure hydraulic oil lines. Meets or exceeds requirements of SAE 100R2.
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two braids of high tensile steel wire
  • WearGuard Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +250° F
  • Approval:United Stated Coast Guard Approved (USCG Approved)
SAE 100R3 NRP 2-Textile Braid

SAE 100R3 NRP 2-Textile Braid

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

B003-03

R3-03

3/16

0.50

1,500

6,000

3.00

0.10

B003-04

R3-04

1/4

0.56

1,250

5,000

3.00

0.12

B003-06

R3-06

3/8

0.75

1,125

4,500

4.00

0.18

B003-08

R3-08

1/2

0.94

1,000

4,000

5.00

0.29

B003-12

R3-12

3/4

1.25

750

3,000

6.00

0.45

B003-16

R3-16

1

1.50

565

2,250

8.00

0.57

2003-20

R3-20

1-1/4

1.75

375

1,500

10.00

0.65

  • Recommended for:Petroleum and water based
    hydraulic fluids, anti-freeze and water. Meets or
    exceeds requirements for SAE 100R3.
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two textile braids, pre-treated for tube and cover adhesion.
  • Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +200° F
SAE 100R4 NRP Suction and Return

SAE 100R4 NRP Suction and Return

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst
(psi)

Rated suction
(in./hg.)

Min. Bend
Radius (in.)

Wt. Per
Ft. (lbs)

2004-12

R4-12

3/4

1.24

300

1,200

25.00

5.0

0.42

2004-16

R4-16

1

1.53

250

1,000

25.00

6.0

0.57

2004-20

R4-20

1-1/4

1.78

200

800

25.00

8.0

0.67

2004-24

R4-24

1-1/2

2.07

150

600

25.00

10.0

0.84

2004-32

R4-32

2

2.54

100

400

25.00

12.0

1.03

2004-40

R4-40

2-1/2

3.12

62

250

25.00

14.0

1.70

2004-48

R4-48

3

3.62

56

225

25.00

18.0

1.98

2004-56

R4-56

3-1/2

4.14

45

180

25.00

21.0

2.34

2004-64

R4-64

4

4.70

35

140

25.00

24.0

3.03

  • Recommended for:Petroleum and water based hydraulic fluids, in low pressure and vacuum service. Especially recommended for return lines in hydraulic control systems. Meets or exceeds requirements of SAE 100R4
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two textile braids, pre-treated for tube and cover adhesion. Helix wires are located between the braids to resist collapse under vacuum or bending.
  • Cover:Black, oil and weather resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +200° F
SUPERFLEX No. 2014 NRP Suction and Return

SUPERFLEX No. 2014 NRP Suction and Return

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Rated suction
(in./hg.)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

2014-12

SF-12

3/4

1.20

300

1,200

25.00

2.5

0.40

2014-16

SF-16

1

1.49

250

1,000

25.00

3.0

0.54

2014-20

SF-20

1-1/4

1.78

200

800

25.00

4.0

0.66

2014-24

SF-24

1-1/2

2.06

150

600

25.00

5.0

0.87

2014-32

SF-32

2

2.54

100

400

25.00

6.0

1.36

2014-40

SF-40

2-1/2

3.02

62

250

25.00

7.0

1.72

  • Recommended for:Petroleum and water based hydraulic fluids, in low pressure and return line service. Minimum bend radius one half the bend radius of SAE 100R4.
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Two textile braids, pre-treated for tube and cover adhesion. Helix wires are located between the braids to resist collapse under vacuum or bending.
  • Cover:Black, oil and weather resistant Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +212° F
  • Branding:Green Mylar "NRP Superflex Return Line"
NRP Jones High Pressure 4 Spiral Hose DIN EN 856 4SH

NRP Jones High Pressure 4 Spiral Hose DIN EN 856 4SH

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1312-10SH

4SH-10

5/8

1.09

6,090

20,305

9.84

0.66

1312-12SH

4SH-12

3/4

1.26

6,090

24,366

11.02

0.96

1312-16SH

4SH-16

1

1.52

5,510

22,046

13.38

1.48

1312-20SH

4SH-20

1-1/4

1.78

5,075

20,015

18.11

1.73

1312-24SH

4SH-24

1-1/2

2.10

4,200

16,824

22.05

2.22

1312-32SH

4SH-32

2

2.64

3,625

14,503

27.55

3.32

  • Tube:Synthetic rubber, resistant against hydraulic fluids
  • Reinforcement:4 high tensile steel wire spiral layers
  • Cover:Black, abrasion and ozone resistant synthetic rubber - MSHA approved. Yellow Mylar lay line.
  • Temperature:-40° F to 212° F (max 248° F intermittent)
  • Lengths:Hose supplied in random lengths.
SAE 100R12 - FLEX PLUS 4 Spiral Jones 9-Lives

SAE 100R12 - FLEX PLUS 4 Spiral Jones 9-Lives

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1212-06

9LIVESR12-06

3/8

0.797

4,000

16,000

2.50

0.40

1212-08

9LIVESR12-08

1/2

0.935

4,000

16,000

3.50

0.54

1212-10

9LIVESR12-10

5/8

1.080

4,000

16,000

4.00

0.74

1212-12

9LIVESR12-12

3/4

1.210

4,000

16,000

4.75

0.94

1212-16

9LIVESR12-16

1

1.495

4,000

16,000

6.00

1.34

1212-20

9LIVESR12-20

1-1/4

1.850

3,000

12,000

8.25

1.74

1212-24

9LIVESR12-24

1-1/2

2.105

2,500

10,000

10.00

2.01

1212-32

9LIVESR12-32

2

2.626

2,500

10,000

12.50

2.75

  • Recommended for:High pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R12 performance and half bend radius.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:Four plies of spirally-wrapped high tensile steel wire.
  • Cover:Black, ultra high abrasion compound which
    is weather and oil resistant. MSHA approved.
    Yellow layline.
  • Temperature:-40° F to 250° F
  • Lengths:Hose supplied in 50' lengths.
  • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
SAE 100R12 - Jones 4 Spiral

SAE 100R12 - Jones 4 Spiral

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1312-06

R12-06

3/8

0.80

4,000

16,000

5.00

0.44

1312-08

R12-08

1/2

0.94

4,000

16,000

7.00

0.55

1312-10

R12-10

5/8

1.08

4,000

16,000

8.00

0.77

1312-12

R12-12

3/4

1.21

4,000

16,000

9.50

0.82

1312-16

R12-16

1

1.50

4,000

16,000

12.00

1.28

1312-20

R12-20

1-1/4

1.85

3,000

12,000

16.50

1.76

1312-24

R12-24

1-1/2

2.10

2,500

10,000

20.00

2.18

1312-32

R12-32

2

2.62

2,500

10,000

25.00

2.85

  • Recommended for:High pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Meets or exceeds SAE 100R12.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:Four plies of spirally-wrapped high tensile steel wire.
  • Cover:A synthetic rubber which is weather and
    temperature resistant. MSHA approved.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in random lengths.
SAE 100R13 - Jones 4 and 6 Spiral

SAE 100R13 - Jones 4 and 6 Spiral

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1313-12

R13-12

3/4

1.26

5,000.00

20,000.00

9.5

1.13

1313-16

R13-16

1

1.52

5,000.00

20,000.00

12.0

1.35

1313-20

R13-20

1-1/4

1.96

5,000.00

20,000.00

16.5

2.41

1313-24

R13-24

1-1/2

2.26

5,000.00

20,000.00

20.0

3.21

1313-32

R13-32

2

2.79

5,000.00

20,000.00

25.0

4.44

  • Recommended for:Recommended for: Extra high pressure hydraulic oil lines for heavy duty service
    applications with crude oils, fuel oils, lubricating oils, and gasoline. Meets or exceeds SAE 100R13.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
  • Cover:A synthetic rubber which is weather and
    temperature resistant. MSHA approved.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in random lengths.
SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1213-12

R13-12+

3/4

1.263

5,000

20,000

4.75

1.07

1213-16

R13-16+

1

1.524

5,000

20,000

6.00

1.48

1213-20

R13-20+

1-1/4

1.962

5,000

20,000

8.25

2.48

1213-24

R13-24+

1-1/2

2.256

5,000

20,000

10.00

3.22

1213-32

R13-32+

2

2.800

5,000

20,000

25.00

5.03

  • Recommended for:Extra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R13 performance and half the bend radius.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
  • Cover:Black ultra high abrasion compound which is weather and oil resistant. MSHA approved. Red layline.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in 50' lengths.
  • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
SAE 100R13 - Jones 4 and 6 Spiral

SAE 100R13 - Jones 4 and 6 Spiral

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1313-12

R13-12

3/4

1.26

5,000.00

20,000.00

9.5

1.13

1313-16

R13-16

1

1.52

5,000.00

20,000.00

12.0

1.35

1313-20

R13-20

1-1/4

1.96

5,000.00

20,000.00

16.5

2.41

1313-24

R13-24

1-1/2

2.26

5,000.00

20,000.00

20.0

3.21

1313-32

R13-32

2

2.79

5,000.00

20,000.00

25.0

4.44

  • Recommended for:Recommended for: Extra high pressure hydraulic oil lines for heavy duty service
    applications with crude oils, fuel oils, lubricating oils, and gasoline. Meets or exceeds SAE 100R13.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
  • Cover:A synthetic rubber which is weather and
    temperature resistant. MSHA approved.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in random lengths.
SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

SAE 100R13- Flex Plus 4 and 6 Spiral Jones 9-Lives

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1213-12

R13-12+

3/4

1.263

5,000

20,000

4.75

1.07

1213-16

R13-16+

1

1.524

5,000

20,000

6.00

1.48

1213-20

R13-20+

1-1/4

1.962

5,000

20,000

8.25

2.48

1213-24

R13-24+

1-1/2

2.256

5,000

20,000

10.00

3.22

1213-32

R13-32+

2

2.800

5,000

20,000

25.00

5.03

  • Recommended for:Extra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R13 performance and half the bend radius.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:Multiple plies of spirally-wrapped high tensile steel wire.
  • Cover:Black ultra high abrasion compound which is weather and oil resistant. MSHA approved. Red layline.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in 50' lengths.
  • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1211-06

9LIVESR15-06

3/8

0.888

6,000

24,000

3.00

0.64

1211-08

9LIVESR15-08

1/2

1.024

6,000

24,000

4.00

0.78

1211-12

9LIVESR15-12

3/4

1.378

6,000

24,000

5.25

1.55

1211-16

9LIVESR15-16

1

1.614

6,000

24,000

6.50

1.94

1211-20

9LIVESR15-20

1-1/4

1.969

6,000

24,000

8.75

2.68.

1211-24

9LIVESR15-24

1-1/2

2.290

6,000

24,000

10.50

3.61

1211-32

9LIVESR15-32

2

2.797

6,000

24,000

26.00

4.90

  • Recommended for:Ultra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R15 performance and half the bend radius.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
  • Cover:Black ultra high abrasion compound which
    is weather and oil resistant. MSHA approved.
    White layline.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in 50' lengths.
  • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
3-Wire Braid NRP High Pressure

3-Wire Braid NRP High Pressure

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A003-04

HP3-04

1/4

0.75

7,000

28,000

5.00

0.42

A003-06

HP3-06

3/8

0.91

5,500

22,000

6.00

0.59

A003-08

HP3-08

1/2

1.10

5,000

20,000

8.00

0.75

A003-12

HP3-12

3/4

1.32

4,000

16,000

11.00

1.02

1003-16

HP3-16

1

1.66

3,500

14,000

13.00

1.51

1003-20

HP3-20

1-1/4

2.06

3,000

12,000

17.00

1.96

1003-24

HP3-24

1-1/2

2.31

2,000

8,000

22.00

2.37

1003-32

HP3-32

2

2.75

2,000

8,000

28.00

2.80

  • Recommended for:Extra high pressure hydraulic oil lines for heavy duty service applications.
  • Tube:Black, oil resistant, Nitrile (NBR)
  • Reinforcement:Three high tensile steel wire braids.
  • Cover:Black, oil and abrasion resistant, Neoprene (CR). MSHA approved.
  • Temperature:-40° F to +250° F
High Pressure Grease Hose

High Pressure Grease Hose

Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min Burst (psi)

Min Bend Radius (in.)

GH3107-03

3/16

0.39

3,000

12,000

1.0

  • Recommended for: High pressure mini-hydraulic line (210-bar). Suitable for hydraulic application with increased resistance to abrasion for use with petroleum, synthetic or water based fluids. specifically designed for diverse greasing and lubrication applications of industrial, hand held or automatic
  • Tube: Thermoplastic elastomer (TPE).
  • Reinforcement: One braid of synthetic fiber.
  • Cover: Black polyurethane
  • Temperature: -40°F to +140°F continuous
Jones 2231 Push-On Hose

Jones 2231 Push-On Hose

Part Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Max O.P. (psi)

Wt. Per Ft. (lbs)

2231-04

PO-04

1/4

1/2

300

10

2231-06

PO-06

3/8

5/8

300

13

2231-08

PO-08

1/2

3/4

300

16

2231-10

PO-10

5/8

29/32

300

23

2231-12

PO-12

3/4

29/32

300

26

  • Recommended for:Air, water, oils, coolants,
    gasoline, etc.
  • Tube:Black, seamless, oil resistant nitrile.
  • Reinforcement:One textile spiral.
  • Cover:Gray, oil and water resistant nitrile/PVC/
  • Temperature:-40° F to +200° F
Mil-DTL-13444 Type I1-Braid Textile

Mil-DTL-13444 Type I1-Braid Textile

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

B007-03

3/16

0.440

425

1,700

2.00

0.072

B007-04

1/4

0.520

300

1,250

2.25

0.094

B007-05

5/16

0.570

275

1,100

2.75

0.101

B007-06

3/8

0.640

250

1,000

3.00

0.125

B007-08

1/2

0.780

200

750

3.75

0.166

B007-10

5/8

0.970

175

700

4.75

0.254

B007-12

3/4

1.095

125

500

5.50

0.287

  • Recommended for:Low and high temperature
    service at medium pressure hydraulic applications
    using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type I
  • Tube:Black, oil resistant, all temperature Nitrile (NBR).
  • Reinforcement:One high tensile textile braid.
  • Cover:Black oil and abrasion resistant Neoprene (CR).
  • Temperature:-65° F to 250° F
Mil-DTL-13444 Type III

Mil-DTL-13444 Type III

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A805-04

3/16

0.49

1,500

6,000

0.75

0.12

A805-05

1/4

0.55

1,500

6,000

1.00

0.14

A805-06

5/16

0.62

1,000

4,000

1.25

0.16

A805-08

13/32

0.74

1,000

4,000

1.75

0.20

A805-10

1/2

0.83

875

3,500

2.25

0.23

A805-12

5/8

0.96

750

3,000

2.75

0.26

1805-16

7/8

1.21

375

1,500

3.50

0.34

1805-20

1-1/8

1.49

300

1,250

4.50

0.46

1805-24

1-3/8

1.72

250

1,000

7.50

0.62

1805-32

1-13/16

2.14

200

750

14.00

0.99

  • Recommended for: Low and high temperature
    service at medium pressure hydraulic applications
    using petroleum base hydraulic fluids. Exceeds the performance requirements of Mil-DTL-13444 Type III
  • Tube:Black, oil resistant Nitrile (NBR).
  • Reinforcement:Inner ply of fabric braid and single high tensile wire braid.
  • Cover:Black oil resistant rubber impregnated fabric.
  • Temperature:-55° F to 300° F
Mil-H-13531 Type I Class A

Mil-H-13531 Type I Class A

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A012-03

3/16

0.5

3,000

12,000

3.5

0.14

A012-04

1/4

0.62

2,750

11,000

4.0

0.21

A012-05

5/16

0.69

2,500

10,000

4.5

0.23

A012-06

3/8

0.78

2,250

9,000

5.0

0.28

A012-08

1/2

0.9

2,000

8,000

7.0

0.35

A012-10

5/8

1.03

1,500

6,000

8.0

0.42

A012-12

3/4

1.18

1,250

5,000

9.5

0.50

A012-16

1

1.49

1,000

4,000

12.0

0.73

1012-20

1-1/4

1.8

625

2,500

16.5

1.03

1012-24

1-1/2

2.06

500

2,000

20.0

1.18

1012-32

2

2.63

375

1,500

25.0

1.65

  • Recommended for: Applications which meet or
    exceed SAE 100R1 Type A. Medium pressure
    hydraulic oil lines.
  • Tube:Black, oil resistant Nitrile (NBR).
  • Reinforcement:One wire braid of high tensile steel.
  • Cover:Black, oil and abrasion resistant Neoprene (CR). MSHA approved
  • Temperature:-65° F to 250° F
Mil-H-13531 Type II Class A

Mil-H-13531 Type II Class A

Part
Number

Hose
I.D. (in.)

Hose
O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A013-03

3/16

0.61

5,000

20,000

3.5

0.25

A013-04

1/4

0.69

5,000

20,000

4.0

0.31

A013-05

5/16

0.74

4,250

17,000

4.5

0.32

A013-06

3/8

0.84

4,000

16,000

5.0

0.39

A013-08

1/2

0.95

3,500

14,000

7.0

0.47

A013-10

5/8

1.09

2,750

11,000

8.0

0.58

A013-12

3/4

1.26

2,250

9,000

9.5

0.67

A013-16

1

1.55

2,000

8,000

12.0

0.99

1013-20

1-1/4

2.00

1,625

6,500

16.5

1.65

1013-24

1-1/2

2.25

1,250

5,000

20.0

1.90

1013-32

2

2.75

1,125

4,500

25.0

2.34

  • Recommended for:Applications which meet or
    exceed SAE 100R2 Type A. Medium pressure
    hydraulic oil lines.
  • Tube:Black, oil resistant, all temperature Nitrile (NBR).
  • Reinforcement:Two wire braid of high tensile steel.
  • Cover:Black, oil and abrasion resistant Neoprene (CR).
  • Temperature:-65° F to 250° F
Non-Conductive - Twin-Line Hydraulic Tool Assemblies

Non-Conductive - Twin-Line Hydraulic Tool Assemblies

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

B098-06

TL-06

3/8

3/4

2,250

9,000

5

0.19

  • Tube:Oil resistant Nitrile (NBR).
  • Reinforcement:Non-conductive textile braid.
  • Cover:Orange oil, abrasion, and weather resistant NBR/PVC
  • Temperature:-40° F to +200° F
  • Assembly Length:Per customer specifications.
  • Assembly Features:Factory made and certified, non-conductive to 75,000 volts. Coupled with NPT male fittings. Includes vinyl bend restrictors.
NRP Jones Aquablast Extra 12,500 PSI

NRP Jones Aquablast Extra 12,500 PSI

Part
Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

Aquablast
Stem

Auablast
Ferrule

AB-06

3/8

0.83

12,500

30,815

6.10

0.56

AB06-06MP

06AB-SL

AB-08

1/2

0.97

12,500

30,815

7.87

0.80

AB08-08MP

08AB-SL

AB-12

3/4

1.29

12,500

30,815

9.84

1.36

AB12-12MP

12AB-SL

AB-16

1

1.51

12,500

30,815

11.81

1.64

AB16-16MP

16AB-SL

  • Recommended for: Very high constant pressure hose for water scaling systems. Suitable for passage of water and aqueous solutions
  • Tube: Nitrile.
  • Reinforcement:4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
  • Cover:Black, oil and abrasion resistant, Neoprene.
  • Temperature:-40° F to +176° F
  • Spec:Tested to EN 1829-2
NRP Jones Aquablast Ultra Hose 16,000 PSI

NRP Jones Aquablast Ultra Hose 16,000 PSI

Part
Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

Aquablast
Stem

Auablast
Ferrule

ABP-06

3/8

0.81

16,000

39,875

6.1

0.55

ABP06-06MP

06ABP-SL

ABP-08

1/2

1.06

16,000

39,875

7.87

1.02

ABP08-08MP

08ABP-SL

ABP-08150

1/2

1.06

16,000

39,875

7.87

1.02

ABP08-08MP  08ABP-SL

ABP-12

3/4

1.26

16,000

39,875

12.2

1.39

ABP12-12MP

ABP-12-12FBSPSS

12ABP-SL

12ABP-SLSS

  • Recommended for: Very high constant pressure hose for water scaling systems. Suitable for passage of water and aqueous solutions
  • Tube: Nitrile.
  • Reinforcement::4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
  • Cover: Black, oil and abrasion resistant, Neoprene.
  • Temperature:-40° F to +176° F
  • Spec:Tested to EN 1829-2
Power Jack Hose NRP No. A320

Power Jack Hose NRP No. A320

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

A320-04

PJ-04

1/4

0.59

10,000

20,000

4.0

0.25

A320-06

PJ-06

3/8

0.75

10,000

20,000

5.0

0.32

  • Recommended for: Hydraulic jack applications. Meets Material Handling Institute specification IJ100 for hydraulic hose and assemblies for jacking systems.
  • Tube:Black, oil resistant, Nitrile (NBR).
  • Reinforcement:Two braids of high tensile steel wire.
  • Cover:Black, neoprene, compounded to resist abrasion, oil , and weather.
  • Temperature:-40° F to +250° F
SAE 100R14 P.T.F.E. Type A

SAE 100R14 P.T.F.E. Type A

Part
Number

Jones ID#

Dash
Size

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

6014-04

PTFE-04

4

3/16

0.30

3,000

12,000

2.00

6014-05

PTFE-05

5

1/4

0.35

3,000

12,000

3.00

6014-06

PTFE-06

6

5/16

0.43

2,540

10,160

4.00

6014-07

PTFE-07

7

3/8

0.48

2,390

9,560

5.00

6014-08

PTFE-08

8

13/32

0.54

2,030

8,120

5.40

6014-10

PTFE-10

10

1/2

0.64

1,740

6,960

6.60

6014-12

PTFE-12

12

5/8

0.74

1,270

5,080

8.00

6014-14

PTFE-14

14

3/4

0.91

1,010

4,040

9.20

6014-16

PTFE-16

16

7/8

1.03

870

3,480

9.20

6014-18

PTFE-18

18

1

1.15

870

3,480

12.00

6014-20

PTFE-20

20

1-1/8

1.30

630

2,520

16.40

  • Recommended for:High and low pressure applications with excellent chemical resistant properties. Exceeds requirements of SAE 100R14 Type A.
  • Tube:PolyTetraFluoroEthylene (P.T.F.E.)
  • Reinforcement:Single braid of 303/304 series stainless steel wire.
  • Temperature:-65° F to +500° F.
  • Note:For specific technical data, refer to SAE 100R14 specifications.
SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

SAE 100R15 - Flex Plus 6 Spiral Jones 9-Lives

Part
Number

Jones ID#

Hose I.D. (in.)

Hose O.D. (in.)

Rated W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

Wt. Per
Ft. (lbs)

1211-06

9LIVESR15-06

3/8

0.888

6,000

24,000

3.00

0.64

1211-08

9LIVESR15-08

1/2

1.024

6,000

24,000

4.00

0.78

1211-12

9LIVESR15-12

3/4

1.378

6,000

24,000

5.25

1.55

1211-16

9LIVESR15-16

1

1.614

6,000

24,000

6.50

1.94

1211-20

9LIVESR15-20

1-1/4

1.969

6,000

24,000

8.75

2.68.

1211-24

9LIVESR15-24

1-1/2

2.290

6,000

24,000

10.50

3.61

1211-32

9LIVESR15-32

2

2.797

6,000

24,000

26.00

4.90

  • Recommended for:Ultra high pressure hydraulic oil lines for heavy duty service applications with crude oils, fuel oils, lubricating oils, and gasoline. Exceeds SAE 100R15 performance and half the bend radius.
  • Tube:Black, oil resistant, Neoprene (CR)
  • Reinforcement:4 or 6 plies of spiral-wound high tensile steel wire with elastomer cushion between wires to eliminate wire-to-wire contact.
  • Cover:Black ultra high abrasion compound which
    is weather and oil resistant. MSHA approved.
    White layline.
  • Temperature:-40° F to +250° F
  • Lengths:Hose supplied in 50' lengths.
  • Premium Features:Ultra high abrasion resistant cover, Half bend radius flexibility, High impulse life
SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

SAE 100R7 Medium PressureThermoplastic Hydraulic Hose

Black Part
Number

Black Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3107N-04

3307N-04

1/4

0.49

2,750

11,000

1.3

3107N-05

3307N-05

5/16

0.56

2,500

10,000

1.8

3107N-06

3307N-06

3/8

0.62

2,250

9,000

2.2

3107N-08

3307N-08

1/2

0.76

2,050

8,200

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One synthetic fiber braid.
  • Cover:Black, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +248° F
SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

SAE 100R7 Medium PressureThermoplastic Hydraulic Hose Orange Non-conductive

Orange Non-
Conductive Part Number

Orange Non-
Conductive Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3207N-04

3407N-04

1/4

0.49

2,750

11,000

1.3

-

-

5/16

0.56

2,500

10,000

1.8

3207N-06

3407N-06

3/8

0.62

2,250

9,000

2.2

3207N-08

3407N-08

1/2

0.76

2,050

8,200

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in medium pressure hydraulic applications. Exceeds requirements of SAE 100R7.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One synthetic fiber braid.
  • Cover:Orange, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +248° F
SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Orange Non-conductive

Orange Non-
Conductive Part Number

Orange Non-
Conductive Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3208N-04

3408N-04

1/4

0.49

5,000

20,000

1.3

-

-

5/16

0.56

4,300

17,200

1.8

3208N-06

3408N-06

3/8

0.62

4,000

16,000

2.2

3208N-08

3408N-08

1/2

0.76

3,500

14,000

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One aramid fiber braid.
  • Cover:Orange, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.
SAE 100R8 High PressureThermoplastic Hydraulic Hose

SAE 100R8 High PressureThermoplastic Hydraulic Hose

Black Part
Number

Black Twin-Line Part Number

Hose I.D. (in.)

Hose O.D. (in.)

Rated
W.P. (psi)

Min. Burst (psi)

Min. Bend Radius (in.)

3108N-04

3308N-04

1/4

0.49

5,000

20,000

1.3

3108N-05

3308N-05

5/16

0.56

4,300

17,200

1.8

3108N-06

3308N-06

3/8

0.62

4,000

16,000

2.2

3108N-08

3308N-08

1/2

0.76

3,500

14,000

3.1

  • Recommended for:Petroleum, synthetic, and water based fluid in high pressure hydraulic applications. Exceeds requirements of SAE 100R8.
  • Tube:Thermoplastic elastomer.
  • Reinforcement:One aramid fiber braid.
  • Cover:Black, oil and abrasion resistant polyurethane.
  • Temperature:-40° F to +212° F. Temperature not to exceed +158°F for air and water based fluids.